COBB A-Pillar Mount for Accessport V3 Focus ST 2013-2015

COBB: FOR-PC-804621
MSRP: $75.26
CJ's Low Price:
1448496000 46246
When you get your Accessport, this A-pillar mount is really the only way to keep it safe and properly, prominently displayed.
CJ's Low Price:
Earn 69 RPM Points What's this?
COBB A-Pillar Mount for Accessport V3 Focus ST 2013-2015
COBB A-Pillar Mount for Accessport V3 Focus ST 2013-2015 COBB A-Pillar Mount for Accessport V3 Focus ST 2013-2015 COBB A-Pillar Mount for Accessport V3 Focus ST 2013-2015 COBB A-Pillar Mount for Accessport V3 Focus ST 2013-2015 COBB A-Pillar Mount for Accessport V3 Focus ST 2013-2015 COBB A-Pillar Mount for Accessport V3 Focus ST 2013-2015

Product Description

COBB Accessport V3 A-Pillar Mount for all 2013, 2014 and 2015 Focus STs.

Looking for a permanent spot for your Accessport V3? This A-pillar mount is the perfect home for your tuner. The ProClip mount keeps your Accessport V3 in site so you can use the digital display to its full potential. By using the A-pillar for a mounting point, the Accessport V3 is kept in sight but out of the way so you don't lose any valuable interior space. A swivel allows you to set the angle of the Accessport for optimal viewing. The mount is constructed from high grade ABS plastic so your tuner will stay steady while you rip around the turns.

- Includes swivel and mount
- Keep your Accessport V3 in view and within reach
- Made of high grade ABS plastic<br/ > - Quick and simple installation

The mount uses the spaces between the panels so installation doesn't require dismantling of the interior. With no interior disassembling required, no damage will be caused as long as the mount is installed properly. This quick and easy install will have you viewing the data on your Accessport V3 in no time at all.

*This mount only fits the left side of the car and will only be useful for 2013-2015 USA Focus ST models.

Order a COBB A-Pillar Mount for Accessport V3 for your 2013, 2014 or 2015 Focus ST from CJ Pony Parts today!

Similar Focus Parts

similar Focus parts More Engine  

Focus Applications

This product will fit the following Ford Focus years:

Product Reviews

Write a review
COBB A-Pillar Mount for Accessport V3 Focus ST 2013-2015 is rated 4.8333 out of 5 by 6.
Rated 4 out of 5 by from Good product I bought this out of necessity because my windshield suction mount for my APv3 broke. I do like the product but I was hoping it was Cobb branded. I also think that its a little on the pricey side since it literally is 2 pieces of plastic, nothing wrong with the actual build quality though. The pillar mount was actually packaged as two different products upon arrival: 1) the actual mount and 2) the clip for the AP case. It's a good fit once you get it in place (I thought I was gonna break it in half because it's a VERY snug fit, no real reason to use the tape). Overall, happy with the product.
Date published: 2015-09-19
Rated 5 out of 5 by from Cobb Tuning Pillar Mount I've had a Cobb AP on my 2013 Focus ST since 2 months after I got it. It had around 1,000 miles on it when I started modifying it in 2012. Although I used it for tuning, I never used my AP's data and monitoring capabilities until I upgraded to the V3 and got a Pillar Mount. Now I have it permanently mounted like any other gauge. Well worth the money.
Date published: 2015-09-24
Rated 5 out of 5 by from Glad I didn't buy some cheap suction cup one... Works great and looks good what else could you ask for....
Date published: 2014-07-15
Rated 5 out of 5 by from Easy install, well made component! Bought this a couple weeks ago and love it. Perfect wait to mount your AP3 in the Focus St. Install was simple, nearly screwed down the mounting bracket to the a-pillar mount. Then I had to remove the weather seal, IP close out. After getting access to the interior IP I unhooked the obd2 from its mount to the door would close and hooked up the cable. Then ran it out the closeout and up the the AP3. Took me about a half hour in total. Couldn't be happen with the result.
Date published: 2015-04-22
Rated 5 out of 5 by from Looks great, snug fit I purchased this item as an alternative to the Cobb Accessport's factory mounting option. While this product is a little on the expensive side, I wanted something that was not affixed using double sided tape or velcro. This fit the bill nicely, while keeping the unit perfectly in-view but also out of my way. It was also very easy to snake the Accessport's connecting wire from under the dash, up behind the weatherstripping of the driver's side door to where this mount was attached. Overall I'm very happy with the product, and as always with as it was a two day turnaround from when I placed my order to when the item arrived on my doorstep.
Date published: 2015-05-01
Rated 5 out of 5 by from Awesome Fit, a must have! I bought this soon after I installed my AP3, honestly I wouldn't want to own an AP3 with out it. Great fit and finish. A must have if you own an AP3
Date published: 2015-07-24
  • 2015-11-26T08:43CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_FORPC804621, PRD, sort_relevancy
  • clientName_cjponyparts

Product Questions


You Might Also Like