COBB Cold Air Intake System Foust Edition Focus ST 2013-2014

COBB: 791100-TFE
CJ's Low Price:
$299.00
In Stock
Free Same Day Shipping
Orders placed by 5:00PM Eastern time ship today1413763200
Earn 299 RPM Points What's this?
COBB Cold Air Intake System Foust Edition Focus ST 2013-2014
Play COBB Cold Air Intake System Foust Edition Focus ST 2013-2014 Video 1 Play COBB Cold Air Intake System Foust Edition Focus ST 2013-2014 Video 3

Product Description

COBB Foust Edition Cold Air Intake System for 2013-2014 Focus STs.

Bolt on extra horsepower by installing the all new Foust Edition Cold Air Intake System for your 2013 or 2014 Focus ST from COBB! COBB's Foust Edition Cold Air Intake System replaces the restrictive factory piping to the turbo with free flowing, 3" mandrel bent aluminum tubing for a dramatic increase in air flow. COBB improved upon the factory airbox ducting by including an oiled, reusable dual-cone filter to increase airflow and to hear that amazing turbo sound. Silicone couplers are used in this kit to ensure a perfect OEM-like fitment.

Features:
- 3" Mandrel Bent Aluminum Tube
- Powder Coated Wrinkle Black with Foust Edition Graphic
- Pre-Oiled Dual-Cone Air Filter
- 4-ply Black Silicone Couplers
- Maintains the Factory Ventilation Hose from the Valve Cover

The COBB Foust Edition Cold Air Intake System for the 2013 and 2014 Focus ST takes a unique airbox design and makes it even better! The new intake looks great under the hood and really cleans up the engine bay with a powder coated wrinkle black finish on the intake tube. A unique, motorsports inspired Foust Powered by COBB graphic is on the intake tube to help proudly display your fine taste in performance modifications.

COBB's High Flow Air Filters are designed to allow very high flow rates, minimize restriction, maximize filtration and provide a long life filter. Using propriety woven cotton and metal mesh with a precision molded rubber base, the COBB High Flow Air Filter guarantees that only clean air passes into your engine for superior efficiency.

COBB's Foust Edition Cold Air Intake System is an easy install for any entry level driveway mechanic.

*The air filter can be washed and reused.

Tech Tip: The Foust Edition COBB Intake is the perfect first step towards Stage 2 power levels when paired with the COBB Front Mount Intercooler.

COBB is an automotive engineering company dedicated to developing solutions that increase vehicle performance and the driving experience. COBB approaches design by taking the entire vehicle-platform into account as a complete system. Their premium quality products are professionally engineered, thoroughly tested and backed to ensure that they meet and exceed customer expectations.
 

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review
Great product
I recieved this part in two days with standard shipping. I installed it in an hour and I have no mechanic experience. It was very easy and the install video walked me through perfectly. Once it was installed i was extremely surprised with how great the sound was. You can really hear the turbo now even in low rpms. The car is 100 times more responsive and going into first gear is also way easier. Couldnt be happier with the Cobb cold air intake.
Nick ciappa July 10, 2014
Awesome
Not only did this purchase come in exactly when they said it would, it was complete. The online video that CJ Pony Parts has was also very helpful for the install for this backyard mechanic. What a great addition this piece has made to my car.
CruznST July 7, 2014
2 Results

Product Video

By Bill Tumas: Last time with our Focus ST project car, we had it on the dyno, where we saved some good gains from our Borla exhaust system. Now that we've improved the exhaust, the next logical step to make in horsepower is going to be to improve the intake system.

Today, we're going to remove the stock air intake and replace it with this cold air kit from COBB. COBB is well known in the sport compact market for their excellent finish. Their cold air kit for the Focus ST is going to include the cold air piping itself, silicon couplers, all necessary hardware, and reusable green air filter. They also give you a nice collection of swag, including a license plate frame, a couple of decals, and even a mail-in postcard, where you can get a body-color decal for your cold air kit.

For this installation, you'll need a 3/8th ratchet, short extension, 15mm socket, 12mm deep socket, 10mm socket, T30 torx bit, 1/4-inch ratchet, a couple of extensions, 8mm socket, 7mm socket, and a small flat head screwdriver.

Our COBB cold air kit is going to replace the factory piping that goes from the turbo behind the engine and then over here to the factory air box. We're going to start by removing the engine cover and then the cowl cover, to give us easier access.

To remove the upper cowl cover, we've got to start by removing the wipers. Little rubber covers, you simply pull up on these and remove the nut underneath. Once the wiper's off, we'd start with the lower cowl with the two torx screws, one located on either end.

Next piece of hardware we've got to remove is underneath these covers. They simply pop straight off. Remove the single bolt on each side. Once the hardware's out, we can remove the cowl.

Now we'll start the factory air intake tube removal by removing the mounting stud here for the engine cover. Just remove the bolt right next to it that holds it to the engine cover. Now the bolt to the throttle body.

Now remove the rubber coupler from the box here. Sometimes it's easier to take the battery cover off to get our socket in a little bit easier. Once we get that loose, we move over to the turbo side. The clamp on this side is going to be at the bottom of the air intake tube all the way down by your turbo. Pretty much, right down here, in the back of the engine. Small screwdriver or a small ratchet, you should be able to get down in there.

Now we've got to remove the hose from the back of the intake before we take it off. Disconnect this hose here so we have a little more room. Remove our stock air intake pipe. Here you see the turbo. Now, I'm going to take the silicone reducers supplied by COBB, put the small end on the turbo itself.

Put a little bit of silicone spray inside the tube to make it easier. Put it down to the place onto our turbo. Make sure you put the clamp on first. Make sure it goes all the way to the bottom and it's seated. Slide the clamp down over the end.

Put another one of the larger hose clamps over the pipe before we install the actual three-inch COBB pipe. Again, I'm going to spray a little bit of silicone on the end here to make it go easier on the silicone coupler. Now, we'll slide the clamp into place and tighten it down. You don't want to tighten it all the way at this point. Just get it snug around the top of the silicone coupler. We'll come back and tighten everything down once we've fitted the rest of the kit.

Now we'll put our last two hose clamps on the last silicon coupler, here, and connect it between the main pipe and the air box. I'll go back and tighten the clamp on the turbo side. We have the pipe adjusted so that everything's fitting pretty good, but to get the bolts in here, we're actually having a clearance problem with the fuel line. That can happen with some installations. In that case, I want to use the bushing up front, just to lift this up for extra clearance.

Put the factory spacer underneath. Then reconnect the line we disconnected earlier. Reinstall the stud for the factory engine cover. Now reconnect the hose on the back of the intake, and move on to the air box. Now, remove the four bolts that hold the air box cover on. These will stay attached to the cover, so just once you have them unthreaded, just let them sit there.

Now, remove the factory paper filter. Now we'll install our reusable filter. It comes with a clamp. You really don't need it because it's such a tight fit in here, it's not going to go anywhere. Now, reinstall the cover. Now we can reinstall our cowl. Covers can go back on. Install the wipers. For the last step, we'll reinstall our engine cover, and our installation is finished.

We installed the white decal COBB provided, but, again, they do give you this postcard that you can mail in and get an actual body-color decal to go on your cold air kit.

Now we'll start it up and see how it sounds. Wow. That actually made a big difference. You can really hear the turbo through the intake now. Even the recirculation valve's a lot louder. Now let's get it out and take it for a test drive.

You can definitely hear the intake when you're driving, especially the high RPMs. It's not as noticeable as it was when we were revving it up in neutral, but you can definitely still hear it when you get on it. Feels good too. Car's really responsive. Can't wait to get it back on the dyno.

Our COBB intake fits great, sounds amazing, and by the seat of the pants, feels like it's making some horsepower too. Installations should only take you around an hour. Should be back on the road in no time.

For more videos on our Focus ST, make sure you subscribe to our YouTube channel.