COBB Stage 1 Power Package with a Accessport V3 for all 2015, 2016 and 2017 EcoBoost Mustangs.
If you’re looking for a little something to wake up your 2015-2017 EcoBoost Mustang, then look no further! COBB has your answer with their Stage 1 Power Package (P/N: 6M1X01) with an AccessPort V3 for your EcoBoost Mustang. With the included high-flow air filter and V3, you’ll surely see measurable gains throughout the entire power curve on your S550. With a simple plug-in and bolt-on installation, this package is the prime choice for noticeable power gains combined with the outstanding build quality we all know from the COBB brand.
Stage 1 Power Pack Includes:
- COBB Accessport V3
- Pre-Oiled High Flow Air Filter
The Accessport V3 from COBB allows for a host of customization options for your S550. You can choose from multiple gauge setups which include your choice of a one gauge display or display of up to six different gauges. The V3 also allows the ability through a large variety of different display options to view specific engine parameters. The information can be displayed in metric or imperial units and a very bright shift light can be set to specific RPM levels. This V3 is the perfect addition to your EcoBoost whether you drive solely on the street or frequent the dragstrip or road course. Unleash the hidden potential in your EcoBoost by picking up COBB’s Stage 1 Power Pack for your S550 today!
COBB's Stage 1 93 Octane Calibration without the included High-Flow Filter has seen a peak of 1.5% RWHP and 22.6% RWTQ, but has shown is largest improvements of 22.9% RWHP and 25.6% RWTQ throughout the power curve!
*Peak gains are measured as the difference between the highest points of the two plots. Max gains are measured as the largest gain at any single point between the two plots, results may vary.
Features and Benefits:
- Customizable Multi-Gauge Display
- Data Logging Capabilities
- Multiple Tuning Options Including Timing, Shift Light, Launch Control, etc.
- In Vehicle Mount With On/Off Switch
- Large, Full Color, 1/1000 High Resolution Screen
- Automatic Dimmer
- Easy-To-Use Interface
- Interchangeable Face Plates
ATTENTION: TheCOBB Accessport fully supports the European (EDM), Australian (AUDM), Asian (SKDM) and Chinese (CHDM) Domestic Market EcoBoost Mustangs.
The factory air filter in your 2015-2017 EcoBoost can be restrictive and limit airflow to your engine. That’s where COBB steps in with their new direct drop-in high flow air filter! This filter is precision molded for a perfect fit and will drastically increase air flow while maintaining its filtering characteristics. This filter is pre-oiled and will stand up to heavy usage and abuse. The cotton gauze media utilized is even washable and reusable!
Tech Tip: Several COBB Custom Features (CCF) are now user adjustable through the Accessport for the EcoBoost mustang. These adjustments include changing map slots, turning custom traction control on/off and adjusting the amount of slip the custom traction control enables. These adjustments can be found under “Tune” -> “Adjustments” -> then select which new feature you’d like to adjust. It’s important to note that the CCF Accessport Adjustment are dependent on the calibration file being used. For example, the Traction Control feature must be enabled via a custom tune (Custom Tune is NOT Included).
This Stage 1 Power Package from COBB is a reliable and affordable package to add power to your EcoBoost across the entire curve. Both the Accessport V3 and High-Flow Filter are the perfect addition to your S550’s mod list!
Please Note: Use can use your PC or Mac based computer to manage maps, download recorded datalogs or quickly update your Accessport. To ensure your new Accessport V3 is up to date, please click HERE to download the latest version of COBB’s Accessport Manager for free.
Manufacturer Part Number: 6M1X01
Order a COBB Stage 1 Power Package with a V3 for your 2015, 2016 or 2017 EcoBoost Mustang from CJ Pony Parts today!
Similar Mustang PartsMore Air Filters
Product ReviewsWrite a review
Do I need to use a dyno with this? I've never used a programmer before and would like to know before I buy it
Is this Tune work with an EC-Mustang 2016 ecoboost ?
Do you have a COBB Power Package With Accessport V3 Stage 1 EcoBoost 2015-2016 available for the Australian delivered Mustang
You Might Also Like
MRT Turbo-Back Exhaust System High-Flow Catted 3" To 2-1/2" Stainless Steel With 4" Tips Fastback EcoBoost 2015-2017/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$1,399.99
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$994.99
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$706.99
The heart of the Cobb Stage One Power Pack is going to be the access port tuner. This is an all-in-one tool for your 2015 Echo Boost Mustang. It's going to allow you to do data logging, allow you to clear and read trouble codes, and best of all, allow you to load the Cobb Performance Maps that are designed to increase the horsepower and torque of your Echo Boost Mustang. This unit is going to come preloaded with maps specifically for use with the high-flow filter that's included.
Cobb also provides a magnetic bracket that'll stick to your dashboard, the cables necessary for hook up, two different face plates, a carrying case, and like I said, a pre-oiled filter that's ready to be installed in your car. The Stage One Power Pack is a great way to add some horsepower to your 2015 Echo Boost Mustang.
The access port can also be updated so future maps can be loaded for future modifications.