Coil Spring Front Pair Big Block 1967-1970/All 1971-1973

CJ's Part Number: CS8330
CJ's Low Price:
$79.99
1481068800 9410
Earn 79 RPM Points What's this?
Coil Spring Front Pair Big Block 1967-1970/All 1971-1973

Product Description

Pair of Front Coil Springs for 1967, 1968, 1969 and 1970 Mustangs with a Big Block Engine and all 1971, 1972 and 1973 Mustangs.

There are several telltale signs that you need new front coil springs on your 1967-1973 Mustang. For example, is your Mustang bottoming out more often than usual when you go over a pothole or speed bump? Are you noticing that your front tires are wearing unevenly and there's no other reason for it? Or maybe your Mustang now has an unusual tilt to it and one side is higher than the other? If you recognize any of these symptoms of damaged front coil springs on your Mustang, then be sure to pick up this new Pair of Front Coil Springs from CJ Pony Parts!

This Pair of Front Coil Springs comes with two springs total: one for the driver side and one for the passenger side. These springs have a 300 lb. rating, and they're a great way to help restore your Mustang's front end suspension! You'll notice an improvement in how well your Mustang handles and drives, and you'll notice less bottoming out and bouncing around when you're driving.

Please Note: This Pair of Front Coil Springs is meant to be used on 1967-1970 Mustangs with a big block engine, and it can be used on all 1971-1973 Mustangs regardless of engine size.

Even though springs aren’t a part we typically think of as being a "wear item," several decades are longer than the Mustang’s designers intended the factory units to last. A worn set of springs will cause excessive body roll, making your car feel vague and wallow in corners. The solution is a new set of quality springs from CJ Pony Parts, which you’ll find at a great price!

Order a Pair of Front Coil Springs for your 1967, 1968, 1969 or 1970 Mustang with a Big Block Engine or your 1971, 1972 or 1973 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Mustang Parts  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 82.89ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

I have a 67 that started as an inline 6 but the previous owners put a 289 v8 in it. Are these the correct springs to put in the vehicle?

Asked by: Gobo
For a stock replacement style spring use these, http://www.cjponyparts.com/coil-spring-pair-6-cylinder-small-block-1967-1970/p/CS8304/, they may need to be cut to achieve the desired ride height, we also offer some progressive style springs. In the refine your search, choose the year and in the type box choose coil springs.
Answered by: rk cjpp
Date published: 2016-06-07

Got 68 previous owner took out 6 cylinder put 302 in it, sags very low CJs have the right parts to make it rite,first mustang in family in 40 years

Asked by: 4 Mustang Joe
Use these coil springs for a small block, http://www.cjponyparts.com/coil-spring-68-70-302351-69-70-boss-302-1968-1970/p/CS8534/, be sure to check all other suspension components before installing the new springs.
Answered by: rk cjpp
Date published: 2016-06-06

I'm switching from a 351 to a 429. Will these support the extra weight?

Asked by: 1quicky
They are designed to handle the weight of a big block in a 1967-1970.
Answered by: CJPP Dave
Date published: 2016-01-13

 Have a 72 mustang convertible 302 needs springs higher  I am chrome side pipes they're hitting once in a while need springs ones broken if these wouldn't work do you have ones that will thank you 

Asked by: Dolphin 61
They are the only stock replacement springs we offer, so they should work.
Answered by: rk cjpp
Date published: 2016-09-25

Will these work for a 1968 mustang with a 302?

Asked by: Rogue2132
No, they won't work - you'd need a big block in your 1968 for them to work.
Answered by: CJ Pony Parts
Date published: 2015-09-16

This price is for a pair correct and they will fit a 1973 Mach 1 with 351 .. thanks Dave

Asked by: mustang mach1
Yes, you're good.
Answered by: CJ Pony Parts
Date published: 2015-09-09

Will these fit my 1973 Mustang Mach 1 with 351C engine. I want to retain the standard ride height and spring rate please.

Asked by: Rodgeydodge
Yes, they'll fit.
Answered by: CJ Pony Parts
Date published: 2015-07-06

Will these springs fit my 69 mustang coupe with 302 engine

Asked by: Ivan
No, it only fits big blocks of that year.
Answered by: CJ Pony Parts
Date published: 2015-02-25
  • 2016-12-07T08:17CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_CS8330, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 97.77ms
  • QUESTIONS, PRODUCT

You Might Also Like