Colgan Custom Carbon Fiber Style Front End Cover with a Plate Hole for all 2015, 2016 and 2017 V6, EcoBoost and Base GT Mustangs.
Your 2015-2017 Mustang will look great with this Colgan Custom Carbon Fiber Style Front End Cover with a Plate Hole. Specifically designed for V6, EcoBoost or Base GT Mustangs, this cover is crafted using durable black carbon fiber with embossed double-padded vinyl. It will add plenty of style to your S550 while still protecting its front end.
Features & Benefits:
- Multi-Piece Design Comes Pre-Attached
- Black Carbon Fiber Embossed Double-Padded Vinyl
- Offers Maximum Protection for Vehicle's Front End
- Backing Made from Soft Flannel
- Double Stitching is Strong and Durable
- Comes with a Plate Hole
- Vinyl Coated "S" Hooks & Reinforced Tabs
- Easy Installation
Colgan Custom’s BC5480CF Front End Cover offers your Mustang maximum protection thanks to its 25 oz. flannel-backed vinyl with Memory Fit and a UV resistant top coat. Its double padding prevents wear-thru and protects your Mustang's finish at critical areas. The top/double stitching makes this hood bra even stronger, while adding more detail and providing a better fit. The cover’s soft flannel backing keeps your paint scratch-free, and the vinyl-coated "S" hooks will not scratch your Pony either!
Installation is simple because everything comes pre-attached and there are no loose parts. The padded hooks are pre-bent to make installation even easier, and you will not need any special tools or equipment. Once the hood bra is in place, your Mustang's hood will open just fine and your headlights will operate normally too.
Please Note: This will NOT fit with performance package Mustangs.
Purchase Colgan Custom's BC5480CF Carbon Fiber Front End Cover with a Plate Hole for your 2015, 2016 or 2017 V6, EcoBoost or Base GT Mustang from CJ Pony Parts today!
Product ReviewsWrite a review
i just purchase this one for my ecoboost and do i have to take it out if i want to get a car wash? also if it is going to rain will i have to take it out as well?
Will it fit en Ecoboost Premium convertible?
You Might Also Like
The Colgan takes it one step further by adding this custom carbon fiber texture to the double-layer padding. On the inside it's nice and felt as well, so it's not going to damage your paint. These are very easy to install. I'm going to show you how using our 2015 Mustang GT.
These custom bras from Colgan Customs are actually available in four different versions. There are two versions for the performance pack with and without a plate hole, and then the same thing on this version, again with or without a plate hole. All of them are going to have the carbon fiber texture to them along with the vinyl inside. That will be a two-piece design, one piece for your hood and a secondary piece for your front bumper.
We're going to start the installation by installing the hood piece first. Before you get started, make sure that the hood and the front bumper are dry, clean, and preferably probably a coat of wax on them as well, to make sure everything's in good shape before you begin the install.
What we're going to do here, is this corner is going to end up on this corner here, then we'll lay it across the hood. Once you have the core seated properly, take the bungee with the hook and you're going to pull down to the square opening right down here. I'll go over and do the same thing with the other side. You're going to pull it across. Once you have it stretched nice and tight, there are two hooks underneath and they go in the factory holes, right there.
Now I grab the larger piece for the bumper. Start by laying it over the center, here. We're going to start with the headlight hooks. These extensions here, clip them right in from the side, on both sides. We started with this side here, with the headlight, now you want to pull this down so that the bra part is over the painted section. When you do that, there's a little tab here that will fit between the headlight and the body. There's a second one out here, on the end. Now do the same on the other side.
Now on the sides you'll notice these little corners. This corner here is designed for the end of your fender. Going to slide that up, get it nice and tight, unhook this right inside here. All the way on the ends, you'll see these felt-tipped angle brackets. These are going to go inside the bumper here. You basically just pull out on these, stick it behind the bumper. Same process over on the driver's side, put that piece there.
Now we'll start with the four hooks that are on bungees on the front. There will be four factory holes these are going to go into. You'll probably have to pull down on the bra, because this is when it's actually going to get tight. Before you finish the connections down below, jump up top here and right here in the hood hinge area, you've got two small clips. That will make sure when you finish the bottom, then everything will stay nice and tight. The last hook on the side here is going to go between the splitter and the belt. Make some small adjustments as you see fit, make everything tight, and your installation is finished.
I know a lot of you probably cover the front of your mustang with painter's tape when you're on your way to a show that's far away. You've got to admit, the Colgan bra looks a lot better than that tape does. It's going to take you a lot less time to install, as well. It fits the care really well. You can even see the body lines where it fits so tight in these areas here, so it's not going to move around when you're driving on the highway. Your lights are open and you've got plenty of air passing through to the radiator and the condenser. The installation, once you have it down, will take you no more than about five or ten minutes. You'll be back on the road in no time.