COMP Cams High Energy 268H Hydraulic Flat Tappet Camshaft and Lifters with a 1500 to 5000 RPM Range for Mustangs with a 390, 427 or 428 Engine.Available with camshaft only, camshaft and lifers, small kit or complete kit.
This hydraulic flat tappet camshaft will fit 1963-1976 Ford FE engines including 352, 360, 361, 390, 391, 406, 410, 427 and 428 cubic inches.
High Energy camshafts are the perfect choice for performance rebuilds. Mainly stock components (rockers, manifolds, heads, compression, converters, gear, etc.) work well with this camshaft family. Although not an optimum choice for racing applications, these camshafts are a great choice for engines where performance upgrades are not planned. Your engine will benefit from a good blend of efficiency and performance.
The High Energy 268H camshaft delivers a noticeable idle. Best used in 390-428 engines as a good replacement for stock performance grinds.
- RPM Range: 1500 to 5000
- Valve Timing: 0.006
- Lobe separation (degrees): 110
- Intake Centerline (degrees): 106
- Valve Lash: Hydraulic
- Duration: Intake 268/Exhaust 268
- Duration @ .050" Lift: Intake 218/Exhaust 218
- Valve Lift: Intake 0.494/Exhaust 0.494
- Lobe Lift: Intake 0.286/Exhaust 0.286
- Camshaft Only
- Camshaft and Lifters
- Small Kit - Camshaft, Lifters, Timing Chain Set and Assembly Lube
- Complete Kit - Everything in Small Kit Plus Valve Springs, Valve Spring Retainers, Valve Locks and Valve Stem Seals
Product ReviewsWrite a review
You Might Also Like
From:CJ's Low Price:$139.26
From:CJ's Low Price:$149.61
CJ's Low Price:$492.91
CJ's Low Price:$769.99