COMP Cams Magnum 270H Hydraulic Flat Tappet Camshaft and Lifters Set with a 1800 to 5800 RPM Range for Mustangs with a 289 or 302 Engine.Available with camshaft only, camshaft and lifers, small kit or complete kit.
This hydraulic flat tappet camshaft will fit Ford 289 and 302 engines from 1963-1995.
Magnum camshafts generate great high RPM power. They can be used with mild ratio rocker arms and traditional performance valve springs as they are easy on valve train parts. These camshafts like compression ratios of 9.5:1 and higher. A torque converter and gear change is usually required. The larger Magnum cams are a little lazy at low RPMs.
The Magnum 270H camshaft is designed for maximum performance use. It works best with a mild torque converter, headers, 9:1 compression and lower gears. Produces a rough idle.
- RPM Range: 1800 to 5800
- Valve Timing: 0.006
- Lobe separation (degrees): 110
- Intake Centerline (degrees): 106
- Valve Lash: Hydraulic
- Duration: Intake 270/Exhaust 270
- Duration @ .050" Lift: Intake 224/Exhaust 224
- Valve Lift: Intake 0.5/Exhaust 0.5
- Lobe Lift: Intake 0.313/Exhaust 0.313
- Camshaft (314143) Only
- Camshaft (314143) and Lifters
- Small Kit - Camshaft (314143), Lifters, Timing Chain Set and Assembly Lube
- Complete Kit - Everything in Small Kit Plus Valve Springs, Valve Spring Retainers, Valve Locks and Valve Stem Seals
You Might Also Like
From:CJ's Low Price:$141.99
CJ's Low Price:$2,428.60
CJ's Low Price:$1,513.25
CJ's Low Price:$301.99