COMP Cams Magnum 270HR Camshaft Set with a 1500 to 5500 RPM Range for 1985-1995 Mustangs with a Fuel Injected 5.0L Engine.Available with camshaft only, camshaft and lifers, small kit or complete kit.
This hydraulic roller camshaft will fit Ford 5.0 Liter engines from 1985-2001.
Magnum cams generate great high RPM power. The can be used with mild ratio rocker arms and traditional performance valve springs as they are easy on valve train parts. These camshafts like compression ratios of 9.5:1 and higher. A torque converter and gear change is really needed. The larger Magnum cams are a little lazy at low RPMs.
Your car will gain a slight idle with this camshaft. It's best used with mild modifications and gears. Mass air is needed.
-RPM Range: 1500 to 5500
-Valve Timing: 0.006
-Lobe separation (degrees): 114
-Intake Centerline (degrees): 110
-Valve Lash: Hydraulic
-Duration: Intake 270/ Exhaust 276
-Duration @ .050" Lift: Intake 215/ Exhaust 220
-Valve Lift: Intake 0.533/ Exhaust 0.544
-Lobe Lift: Intake 0.333/ Exhaust 0.342
-Camshaft (353108) Only
-Camshaft (353108) and Lifters (LIFTER1)
-Small Kit - Camshaft (353108), Lifters (LIFTER1), Timing Chain Set (2138) and Assembly Lube
-Complete Kit - Everything in Small Kit Plus Valve Springs (98616), Valve Spring Retainers (74016), Locks (61116), and Valve Stem Seals (50316)