COMP Cams Magnum 281HR Camshaft Set with a 2000 to 5500 RPM Range for 1985-1995 Mustangs with Carbureted 5.0L Engines.Available with camshaft only, camshaft and lifers, small kit or complete kit.
This hydraulic roller camshaft will fit Ford 5.0 Liter engines from 1985-2001.
Magnum cams generate great high RPM power. The can be used with mild ratio rocker arms and traditional performance valve springs as they are easy on valve train parts. These camshafts like compression ratios of 9.5:1 and higher. A torque converter and gear change is really needed. The larger Magnum cams are a little lazy at low RPMs.
The best power is made above 3500 RPMs but good torque is still produced. A mild rough idle is created and works great in street machines. This is the largest camshaft that can be used with stock cylinders heads and intake manifold. A higher stall torque converter is required.
-RPM Range: 2000 to 5500
-Valve Timing: 0.006
-Lobe separation (degrees): 110
-Intake Centerline (degrees): 106
-Valve Lash: Hydraulic
-Duration: Intake 281/ Exhaust 281
-Duration @ .050" Lift: Intake 220/ Exhaust 220
-Valve Lift: Intake 0.512/ Exhaust 0.512
-Lobe Lift: Intake 0.32/ Exhaust 0.32
-Camshaft (354408) Only
-Camshaft (354408) and Lifters (LIFTER1)
-Small Kit - Camshaft (354408), Lifters (LIFTER1), Timing Chain Set (2138) and Assembly Lube
-Complete Kit - Everything in Small Kit Plus Valve Springs (98616), Valve Spring Retainers (74016), Locks (61116), and Valve Stem Seals (50316)
Product ReviewsWrite a review
You Might Also Like
From: /** Note: This is used for related configurable parts to properly display price w/o regular price */?>CJ's Low Price:$306.86
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$995.67
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$375.89