COMP Cams Magnum 281HR Camshaft Set with a 2000 to 5500 RPM Range for 1985-1995 Mustangs with a Fuel Injected 5.0L Engine.Available with camshaft only, camshaft and lifers, small kit or complete kit.
This hydraulic roller camshaft will fit Ford 5.0 Liter engines from 1985-2001.
Magnum cams generate great high RPM power. The can be used with mild ratio rocker arms and traditional performance valve springs as they are easy on valve train parts. These camshafts like compression ratios of 9.5:1 and higher. A torque converter and gear change is really needed. The larger Magnum cams are a little lazy at low RPMs.
With this camshaft, the engine will require mass air, cylinder heads, intake, headers and 3.55-3.73 gears. A 5-speed or 2500 stall torque converter will work best.
-RPM Range: 2000 to 5500
-Valve Timing: 0.006
-Lobe separation (degrees): 112
-Intake Centerline (degrees): 108
-Valve Lash: Hydraulic
-Duration: Intake 281/ Exhaust 284
-Duration @ .050" Lift: Intake 220/ Exhaust 224
-Valve Lift: Intake 0.512/ Exhaust 0.533
-Lobe Lift: Intake 0.32/ Exhaust 0.334
-Camshaft (353028) Only
-Camshaft (353028) and Lifters (LIFTER1)
-Small Kit - Camshaft (353028), Lifters (LIFTER1), Timing Chain Set (2138) and Assembly Lube
-Complete Kit - Everything in Small Kit Plus Valve Springs (98616), Valve Spring Retainers (74016), Locks (61116), and Valve Stem Seals (50316)
Product ReviewsWrite a review