COMP Cams Magnum 305H Hydraulic Flat Tappet Camshaft Set with a 3000 to 6800 RPM Range for Mustangs with a 429 or 460 Engine.Available with camshaft only, camshaft and lifers, small kit or complete kit.
This hydraulic flat tappet camshaft will fit 1968-1994 429 and 460 V8 engines.
Magnum camshafts generate great high RPM power. They can be used with mild ratio rocker arms and traditional performance valve springs as they are easy on valve train parts. The Magnum camshafts generally like compression ratios of 9.5:1 and higher. A torque converter and gear change are usually recommended additional upgrades. The larger Magnum camshafts tend to be a little lazy at low RPMs.
The Magnum 305H camshaft works great when paired with a tunnel ram intake. Use this camshaft on a jet boat with a B impeller, flat bottom or hydro bracket racer.
- RPM Range: 3000 to 6800
- Valve Timing: 0.006
- Lobe separation (degrees): 110
- Intake Centerline (degrees): 110
- Valve Lash: Hydraulic
- Duration: Intake 305/Exhaust 305
- Duration @ .050" Lift: Intake 253/Exhaust 253
- Valve Lift: Intake 0.585/Exhaust 0.585
- Lobe Lift: Intake 0.339/Exhaust 0.339
- Camshaft Only
- Camshaft and Lifters
- Small Kit - Camshaft, Lifters, Timing Chain Set and Assembly Lube
- Complete Kit - Everything in Small Kit plus Valve Springs, Valve Spring Retainers, Valve Locks and Valve Stem Seals
Similar Mustang PartsMore Mustang Camshafts, Rocker Arms & Valve Train
You Might Also Like
From:CJ's Low Price:$144.99
CJ's Low Price:$289.99
CJ's Low Price:$208.99