Set of COMP Cams 5/16" diameter, 6.250" length Hi-Tech Pushrods for 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, and 1995 Mustangs with a 5.0L engine.
Pushrods are one aspect of an engine that is typically overlooked when it comes time to begin modifying your Mustang. However, pushrods are extremely important to the performance and overall life of your engine. A good set of push rods will not only add horsepower but also preserve your engine. If you own a 1985-1995 Mustang with a 5.0L engine then this set of COMP Cams Pushrods is an absolute necessity. Don't wait to strengthen the motor in your Mustang!
- One-piece construction from .080 wall, seamless chromemoly
- Heat-treated for extended durability & guide plate compatibility
- Precision formed & reinforced ends
- Black-oxide finished with laser etched part number & length
- Ideal for serious street performance & race applications
Hi-Tech Pushrods feature a one-piece design from .080 wall, seamless chromemoly tubing that ensures the ultimate in strength and durability. Ends are precision formed, yielding added thickness and strength in the critical tip area, while maintaining constant wall thickness and concentricity. The pushrods are then heat-treated for maximum strength to ensure compatibility with guide plates. They are OD ground for consistency and black-oxide finished with length and part number laser etched on the OD for ease of identification.
Pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the parts in the valve train, as well as the rpm at which the engine will be run. Today¹s all-out race engines demand the highest quality components at every step, and COMP Cams Hi-Tech Pushrods fill that requirement.
COMP Cams was founded in 1976 and incorporated one year later in Memphis, Tennessee. COMP Cams began by selling valve train products through a network of satellite distribution stores and grew from there, especially as demand for COMP Cams products grew in the marketplace. Today, COMP Cams consists of numerous subsidiaries, which positions them as one of the leaders in aftermarket automotive performance.
One of the focuses throughout their product development process is to make every COMP Cams product produce in real world situations. The company works extensively with individual car owners and racing teams to ensure that each COMP Cams product will perform to the highest of standards. COMP Cams also drives every product's development through the use of technology. They employ the largest and best trained engineering staff in the industry and utilize the most sophisticated manufacturing processes and test equipment available to manufacture the camshafts and valve train components for your Mustang. Another plus for street car owners is that COMP Cams tests many products on the racing circuit, giving it runs on NASCAR or NHRA to make sure that these products can hold up under the worst of circumstances before they get released for street applications. This is another way you can feel confident you're getting the best from COMP Cams.
Order COMP Cams High Energy 5/16" Diameter, 6.250" Length Pushrods for your 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, or 1995 Mustang with a 5.0L Engine from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
From:CJ's Low Price:$306.86
CJ's Low Price:$408.99
Regular Price: $53.99
Special Price: $51.29
CJ's Low Price:$1,593.71