Corbeau Black Retractable 3-Point Bolt-In Harness Seat Belt.Corbeau 2-inch retractable harness seatbelts are a result of Corbeau?s dedication to innovation and style. This harness belt features an inertia reel, which allows your harness belt to function like your stock belt. That means you can still move around but it will lock under sudden movement or jolt. In addition, the retractable harness seatbelt has the double release feature, which allows you to disconnect the front shoulder straps from the rear tail strap. This feature allows for easy access to the rear seat as you can disconnect that rear strap without taking the belts out. Corbeau harness seatbelts can be bolted to your factory provided mounting points. Corbeau hardware was manufactured to bolt right up to your factory bolt holes. In most cases no drilling or modifications are necessary, they just bolt right in.
2-Inch Webbing: Military grade nylon webbing with custom "Corbeau Racing" embroidery.
Release Buckle: Push button release buckle for easy disengagement.
Inertia Reel: Allows the harness belt to retract like a stock belt. Sudden movement or jolt will cause the belt to lock.
On-Off Switch: Allows you to control when you want the belt to retract and when you want it to function as a full time harness belt.
Bolt-In: End of the straps are equipped with a bolt, which will bolt to your mounting points.
Waist Pad: All 2-inch belts are equipped with a pressure reducing waist pad to provide extra comfort and support.
This product will fit the following Ford Mustang years:
Product ReviewsWrite a review
Would these work on a 76 Vw beetle?
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Date published: 2016-02-29
Will these work with factory seats on a 68 mustang?
Date published: 2015-12-01
Will it fit on a nissan versa 2012
Unsure. We only have tested it for the fitments listed. Anything outside of that would only known by the manufacturer. Since we're not a dealer of Nissan parts, we won't be testing that fitment at this time.
Date published: 2015-04-02
which factory location does this mount too? also does this work with the corbeau seats? thanks
Based upon where the standard 3-point seat belts mount on classic Mustangs, it's likely going to go on the door jamb area. That can vary depending on your body style, but should give you a general idea of where it goes. It will work with Corbeau seats.
Date published: 2015-03-12