Driver Side Dark Parchment Door Panel Cup for all 2001, 2002, 2003 and 2004 Coupe Mustangs with Power Windows and Door Locks.
Replace your 2001, 2002, 2003 or 2004 coupe Mustang's worn out or damaged driver side door panel cup with this OE style direct replacement. This all new Driver Side Door Panel Cup comes in a dark parchement color that matches the factory parchment interior color option. The insert features accurate locations for the factory power window and door lock switches, as well as the power mirror switch.
Over the years, the clips that hold the door panel cup in place take a lot of wear and tear and are often broken from constant use. If your door panel insert feels loose inside the door and looks a little rough, this new Door Panel Cup is a great way to get your 2001-2004 Mustang's interior looking fresh and new!
Has your 2001, 2002, 2003 or 2004 Mustang's interior seen better days? CJ Pony Parts has hundreds of parts for SN95 Mustang interiors, so aging and damage can easily be fixed and your Mustang can look like great in no time. Popular upgrades include new seats and upholstery or a new shifter. These upgrades, along with others, can make your Mustang look and feel like new again.
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$69.99
CJ's Low Price:$66.99
Door cups are going to be available for your coupe or convertible in all the factory colors, including the black, tan, saddle, as well as the charcoal we'll be installing on 2001 Bullet. The installation is very simple of these OEM products and we're going to show you how to do it.
Typically the only tool you're going to need to install the door cups is going to be a Phillips-head screwdriver. We're going to start by removing it right here. I do want to make a point of mentioning that if this part of your door panel is damaged, then replacing the door cup's probably not going to fix your issue. You may need a whole new door panel. Typically though, these are okay and the door panel's a problem, simply push down here and pull out. Now there's normally a clip back here. This is another common area these things break. In the case of our Bullet, this is where this one's broken off at.
Going to flip the door cup over, remove the two screws holding our window switches in place. Then pop the clip for the mirrors. The nearest switch is held to the door cup by this little push pin. Simply just push this pad in and slide it through. I'm going to lift it back first and then push it through. Take the window switch. It will just pop right into place on our new door cup. We'll install the switch assembly. Plug in the mirrors. At this point, test everything. Make sure the mirrors are working. Make sure that the door lock works. Don't worry about the windows. If the lock works, if the windows weren't before, they're going to work now as well.
Now what you'll want to do is line this clip up with this opening in the back here and then push the door panel cup into place. That's all there is to it. Repeat the process if you're replacing the passenger side, and you're all finished. Replacing the door cups in your SN95 Mustang not only improvements the function of the door but it also looks a hack of a lot better without the door cup falling off. Installation's very simple, like I said. The only tool required is a Phillips-head screwdriver. Take about five minutes per side and you'll be back on the road in no time.