Cowl Panel Assembly 2-Piece 1965-1966

CJ's Part Number: COWL1
CJ's Low Price:
$385.99
In StockOrders placed today will ship tomorrow1412121600
Earn 385 RPM Points What's this?
COWL1
COWL1 COWL1_a COWL1_b COWL1_c COWL1_d COWL1_e Play Cowl Panel Assembly 2-Piece 1965-1966 Video 1

Product Description

2-Piece Cowl Panel Assembly for all 1965-1966 Mustangs.

Finally available, this is an upper and lower cowl panel assembly made from heavy gauge stamped steel. Includes windshield molding pins in the upper section of the panel. Includes upper and lower cowl panel.

*This cowl is correct for 1964-1/2 and early 1965 Mustangs. Late 1965 and 1966 Mustangs were slightly different where the wiper arms come through the cowl. This will work on late 1965 and 1966 Mustangs.

Similar Mustang Parts

similar mustang parts More Mustang Cowl Area  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review
Very Good Fit
This is a well made panel assy. I was very happy with the fit. The only minor issue was with the wiper post holes. If you try to center them, one will line up perfectly but the other will be off a touch, no biggie split the difference. After I installed it I thought I could have easily tweaked it by placing a large deep socket over the wiper post and bent the lower panel just enough to center the post in the upper panel.
Brian J June 27, 2014
1 Results

Product Video

By Bill Tumas: We're here with a replacement two-piece cowl for your '64 through '66 Mustang. The two-piece cowl comes predrilled out for your hood decal seal, your washer nozzles, as well as your factory export braces. The upper cowl features the correct style vents. Although it can be used for a '64 through '66 Mustangs, it has a recessed opening, which is designed for a '64 through '65, which is going to use the bezel. It also uses the pin type window clips, so make sure you order the correct clips when replacing your cowl.

The lower cowl is going to feature the correct style original mounting hats, as well as pre-threaded nuts for mounting your wiper arms. The underside of your lower cowl features the studs for mounting your fresh air vent, as well as a bracket for your wiper motor. Our two-piece cowl will fit coupe, convertible, or fastback and is an excellent choice for replacing that commonly rusted part on your classic Mustang.