Cowl Vent Grille Reproduction Black 1983-1993

CJ's Part Number: CC3
MSRP: $62.99
CJ's Low Price:
$49.99
1419724800 4705
Earn 49 RPM Points What's this?
CC3
CC3 Play Cowl Vent Grille Reproduction Black 1983-1993 Video 1

Product Description

Black Reproduction Cowl Vent Grille for all 1983-1993 Mustangs.

Over the years, your Mustang's cowl vent grille can become faded, cracked or even break. Replace your worn out original with this quality reproduction cowl vent grille.

Made from molded black plastic. The cowl vent grille attaches over the cowl located between the back of the hood and the bottom of the front windshield.

Make sure to get our cowl vent grille mounting kit so you can be sure your new grille is secured properly!

Similar Mustang Parts

similar mustang parts More Mustang Cowl Area  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review
Decent
This is a decent piece for the price. Like a lot of things there is a reason it is cheaper than OEM. The top side you actually see looks real good just like the original. However, underneath the plastic support areas are half the size so a little weaker than OEM. For the price it is a nice one. If you want original look and solid construction I would spend the extra and try Ford OEM. Still 4 stars though because it is half price and decent.
Lance September 12, 2014
great products and customer service
Panel was simple to put on and identical to the OEM one i took off.Best part though is customer service with CJ Pony parts!I just started buying from them after having troubles else where and they have been great to deal with and they are much closer so i get parts in 2 days!
michael bland March 4, 2014
WOW
This will make your whole front look better
Cesa March 9, 2012
3 Results

You Might Also Like

Product Video

By Bill Tumas: The cowl grille is one of those parts on a Fox Body that simply doesn't hold up real well. The black plastic tends to fade, and over time they also tend to crack. For years, your only option for finding a good one was to scour the classified or hit up your local swap meet. Today, high quality reproduction is a phone call or click away. Today I'm going to show you how to replace it using this 1990 Mustang convertible.

While the rest of our convertible is in really good shape, the cowl is typical of an older Fox Body. We've got some cracks on the edge here. The entire thing is dated. It's time for a new one. The installation is very straightforward; the only tool required is a Phillips head screwdriver.

We're going to start by removing our wipers. We're going to lift up on the arm and pull this little tab out, rest the arm against the tab, and slide the wiper off. Now we'll remove the six screws that hold the grille on: two here, two in the middle, and two on the other side. Once we remove the screws, the grille will just lift straight off. We're going to reach underneath and disconnect the washer nozzle hose. Before you throw your old grille away, you want to make sure you get the washer nozzle off of it. You'll need that for your new grille.

We'll install the nozzle on our new grille, and it's ready to install. Before we install the new grille, we're going to clean up this area and replace these screw retainers as well. Easy way to get these out is to push them through and pull them out from the bottom.

We'll install the new screw retainers, and press down and click them into place. Now we're ready to install the new grille and reconnect the washer nozzle. We're going to tighten these down snug; you don't want to over- tighten them, since you're tightening into plastic. Now the last step is to reinstall our wipers. We'll line them up, tilt them forward again, push the clip down, and release. And our installation's finished.

A few minutes of work made a huge difference on our convertible. Installation should take you no more than about 10 minutes. You'll be back on the road in no time.