cp-e Race Red Cold Air Intake Kit with a SynoilD Filter for all 2013-2014 Focus STs.
Replace the restrictive factory intake system on your 2013-2014 Focus ST and upgrade to this all-new cold air intake kit with a SynoilD air filter from cp-e! The engineers at cp-e took the good and the bad from the stock intake design and made their cold air intake kit even better.
- Available with a Black, Race Red, or Tangerine Scream Powder Coated Finish
- 4" SynoilD Air Filter
- Full 3" Mandrel-Bent Intake Tubing
- CNC-Lathed Port for the PCV System
- CNC-Milled MAP Bung
- Laser Cut Support Bracket
- CNC-Bent 18-Gauge Stainless Steel Intake Box
- Clear Plexiglass Air Box Cover
- Mounts in the Factory Locations
- Includes All Necessary Mounting Hardware
These cold air intakes are available with a Black, Race Red, or Tangerine Scream powder coated finish to match the exterior of your Focus ST for a custom look under the hood.
The cp-e cold air intake offers the most well thought out solution for getting the greatest amount of air possible to your turbo for maximum power. Each intake kit comes with a full 3” mandrel bent intake tube. Welded onto the tube are a CNC-lathed port for the PCV system, a CNC-milled MAP bung, and a laser cut support bracket.
The intake tube attaches to a massive air box through a 5-ply silicone elbow and a CNC-lathed aluminum bellmouth. This velocity stack bellmouth smoothly compresses the air from 4” to 3”, providing a minimal amount of energy loss which leads to higher air speeds through the intake tube. The included 4” SynoilD air filter is specially designed by cp-e to provide the most free flowing air flow possible.
The air box used in cp-e's cold air intake kits are laser cut and CNC-bent from 18-gauge stainless steel for long lasting durability. Stainless steel is a great choice for this application both for its resistance to corrosion and its thermal properties that allow the interior of the box to stay cool even when the box itself heats up. The air box utilizes both stock fresh air ducts, and also sucks up cool fresh air from the wheel well. The air box is topped off by a clear plexiglass cover to seal the SynoilD air filter from the heat. This clear cover also provides a unique view and easy access to the air filter for cleaning. Lastly, the air box easily mounts in the factory location with the laser cut brackets and CNC-lathed mounting feet.
Order one of cp-e's Cold Air Intake Kits with a SynoilD Filter for your 2013-2014 Focus ST from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$395.19
CJ's Low Price:$395.19
CJ's Low Price:$945.25
Kelly:That is our air box and we actually use stainless steel as oppose to many of our competitors who just use mild steel.
Bill: And this is a direct replacement for your factory box?
Bill: And then tell us about the rest of your kit. Obviously the color is awesome. We love the tangerine screen. What are the colors available?
Kelly:We always have our race red and satin black available, but every now and then, we do special colors.
Bill: Tell us about the rest of the kid, what all components are going to come with your cold air kit?
Kelly:Along with the air box, we have a plexiglass top and so that allows you to monitor your filter to see if it needs cleaned or replaced and then we have a 3inch mandrel bend aluminum tube.
Bill: With that plexiglass, that basically keeps the air box somewhat sealed?
Bill: Tell us about the filter that's included with your kit.
Kelly:We offer a pre-oil filter and a drive-flow filter.
Bill: Why do you offer two options? Is there any performance any one of them?
Kelly:No, it's really just personal preference on our customer's part.
Bill: Tell us about that belt inlet that you have over there. What is that for?
Kelly:That is our CNC machine L mouth and that attaches straight to the filter and that is just for better flow for air from the tube.
Bill: When you get a turbulence, get it nice and smooth and get the best velocity for the intake as possible.
Bill: The rest of your products, these are all made in the USA, correct?
Kelly:Yes, all made in the USA, even down to the powder coating.
Bill: Thank you. Thank you for bringing it out. We appreciate it.