cp-e Lightweight Front Mount Intercooler for all 2013, 2014, 2015, 2016 and 2017 Focus STs.
While the factory intercooler on 2013-2017 Focus STs does an great job for the everyday driver, you will need to upgrade it if you crave to go a little faster. In that case, don't hesitate on purchasing this Lightweight Front Mount Intercooler from cp-3. Designed to combine performance with a smaller footprint, this intercooler will allow you to improve the power of your Focus ST and modify it in smaller increments.
Features & Benefits:
- Lightweight Design with Maximum Core Layout
- 28" X 8-1/4" X 3-1/2" Core
- Fully Cast End-Tanks
- Minimal Pressure Drop & Turbo Lag
- Provides Optimal Airflow with Even Distribution
- Significantly Lower & More Consistent Charge Temperatures
- Bolt-On Design with Factory Mounting Locations
*The cp-e Lightweight Front Mount Intercooler will NOT fit the 2016-2017 Focus RS.
Cp-e's FDCK00006T intercooler features a lightweight design that will still improve and enlarge the core compared to its stock counterpart. The core itself is 28" x 8-1/4" x 3-1/2" and makes use of the bar & plate design to make sure there is still a high level of efficiency. The smaller, lightweight configuration will help minimize any turbo lag along with any overall pressure loss on your Focus ST.
As all of their others, cp-e crafts this intercooler to include cast end-tanks that have been welded and pressure tested with the core. The engineering of these end tanks will virtually eliminate turbulence within them to keep the overall drivability of your Hot Hatch at a premium. These end tanks also come with laser cut brackets which will help this intercooler mount right in the stock location, directly bolting into place.
Once mounted within your engine bay, this intercooler will provide the optimal amount of airflow with an even distribution throughout its core. The end tanks will direct the air properly into the core to provide your Focus ST with the most consistent conditions going into the engine. In fact, you'll see significantly lower and more consistent charge temperatures.
What are you waiting for? Purchase cp-e's FDCK00006T Lightweight Front Mount Intercooler for your 2013, 2014, 2015, 2016 or 2017 Focus ST from CJ Pony Parts today!
Product ReviewsWrite a review
Hi , It this intercooler OK for a 2015 tdci focus st ( UK model ) and is it still free delivery to the UK
I'm trying to get up to 285 hp at the tires. I'm pretty sure intake, access port, off-road down pipe, exhaust, and an intercooler will do the job. Is this intercooler up to the task? I don't want to replace the stock turbo.
Will I have to upgrade the charge pipes as well? I don't want to have to adjust them if they keep blowing off, rather I'd just get better pipes but I think I've heard this works well will factory pipes.
I do not plan on upgrading the turbocharger. Would it be worth getting this intercooler over the lightweight version for performance on my 2016 Focus ST? Is a tune/programmer necessary or can I run stock programming? (for now)
What's the difference between this light weight intercooler vs full size Cpe?
will the factory shutter system be compatible with this FMIC?
You Might Also Like
CJ's Low Price:$506.00
CJ's Low Price:$945.25
CJ's Low Price:$500.00