Currie Third Member Assembly Complete With Detroit True-Trac Differential And 3.25:1 Gears 28-Spline 8” 1965-1973

Currie: CE-8IN325S28TTOOL
CJ's Low Price:
$1,849.99
1481241600 44846
Earn 1849 RPM Points What's this?
Currie Third Member Assembly Complete With Detroit True-Trac Differential And 3.25:1 Gears 28-Spline 8” 1965-1973
Currie Third Member Assembly Complete With Detroit True-Trac Differential And 3.25:1 Gears 28-Spline 8” 1965-1973 Currie Third Member Assembly Complete With Detroit True-Trac Differential And 3.25:1 Gears 28-Spline 8” 1965-1973 Currie Third Member Assembly Complete With Detroit True-Trac Differential And 3.25:1 Gears 28-Spline 8” 1965-1973 Currie Third Member Assembly Complete With Detroit True-Trac Differential And 3.25:1 Gears 28-Spline 8” 1965-1973 Currie Third Member Assembly Complete With Detroit True-Trac Differential And 3.25:1 Gears 28-Spline 8” 1965-1973 Currie Third Member Assembly Complete With Detroit True-Trac Differential And 3.25:1 Gears 28-Spline 8” 1965-1973
Currie

Product Description

Currie 28-Spline Complete Third Member Assembly with a Detroit True-Trac Differential and 3.25:1 Gear Ratio for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with an 8" Rear End.

After years of quick starts off the line and all around driving wear and tear, the stock differential might be losing its grip and ability to transfer power to the rear wheels quickly and effectively. If you have noticed an increased and or frequent slipping in the rear of your Mustang it might be time to upgrade or replace the rear differential in your 1965-1973 Mustang with an 8" rear end with this Currie 28-Spline Complete Third Member Assembly with a Detroit True-Trac Differential from CJ Pony Parts today!

This Currie 28-Spline Complete Third Member Assembly for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 V8 Mustangs with an 8" Rear End comes pre-assembled so you can bolt it in place and be back on the street in no time. This unit is all inclusive with the cast iron shell protecting the gears and all the other components inside as well. This third member is designed for Mustangs with a 28-spline axle and has a Detroit TrueTrac differential with worm gear style posi-traction that provides resolute, limited slip.

Gear Ratios Available:
- 3.00:1
- 3.25:1
- 3.55:1
- 3.80:1
- 4.11:1

The evenly distributed power to the back wheels combined with the ability to automatically adjust wheel speed while driving makes this a great upgrade or replacement for any 1965-1973 Mustang with an 8” rear end that may have lost a step or two over the years. You can even choose which gear ratio best suits the application and situation in which you drive your Mustang in. This will get your 1965-1973 Mustang really laying the power down on the road effectively and powerfully, like it once did long ago!

You will notice the improvement in traction and grip immediately because both of your rear wheels will really start to bite into the road and get you drastically firm traction and impressively quick starts off the line. This welcome increase in ride quality and traction is produced by transferring 100% of the torque to both rear drive wheels at the same time!

Please Note: The 8" rear is found in most V8 Mustangs however, some big block mustangs and some special ordered models have a 9" rear. Be sure to check fitment of your Mustang before ordering.

Similar Mustang Parts

similar Mustang parts More Restomod Rear Axle  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 197.67ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 127.98ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like