Custom Autosound Dash Speaker Dual Voice Coil 4X10 1965-1966

Custom Autosound: 3001DVC
CJ's Low Price:
$46.95
1481155200 31112
Earn 46 RPM Points What's this?
Custom Autosound Dash Speaker Dual Voice Coil 4X10 1965-1966
Custom Autosound Dash Speaker Dual Voice Coil 4X10 1965-1966 Custom Autosound Dash Speaker Dual Voice Coil 4X10 1965-1966 Custom Autosound Dash Speaker Dual Voice Coil 4X10 1965-1966 Custom Autosound Dash Speaker Dual Voice Coil 4X10 1965-1966 Custom Autosound Dash Speaker Dual Voice Coil 4X10 1965-1966 Custom Autosound Dash Speaker Dual Voice Coil 4X10 1965-1966
Custom Autosound

Product Description

Custom Autosound Dual Voice Coil 4"x10" Dash Speaker for all 1965-1966 Mustangs.

If you're upgrading the stereo in your 1965-1966 Mustang, then you're going to need some new speakers! So if you're on the hunt for a new dash speaker, you should definitely take a closer look at this Dual Voice Coil 4"x10" Dash Speaker from Custom Autosound, available today from CJ Pony Parts!

Features & Benefits:
- Requires a Modern Stereo with Left and Right Speaker Outputs
- Gives You the Best Quality Sound Possible from Your Original Speaker Location
- Up to 70% More Cone Area Than Conventional Dual Speaker Setups
- Improves Bass Response and Power Handling
- Both Stereo Channels Hook Directly to One Speaker
- Handles 140 Max Watts
- Speaker is 4" x 10"
- Direct Fit Replacement

This Custom Autosound 3001DVC Dual Voice Coil 4"x10" Dash Speaker is a direct fit replacement that requires a modern stereo with left and right speaker outputs. This dash speaker will give you the best possible sound quality from your original speaker location! You'll get up to 70% more cone area with this speaker than you would with conventional dual speaker setups. You'll also enjoy improved bass response and power handling. Both stereo channels will hook directly into one speaker, and this dash speaker handles 140 max watts. You'll love the way this speaker sounds when you're cruising down the road and listening to your favorite tunes!

A good radio is only half of what you need to give your Mustang an excellent sound system. The other half of the equation is good speakers, which can make a dramatic difference when you already have a quality radio. CJ Pony Parts offers a variety of Mustang speakers and speaker grilles, so you can upgrade and get the perfect speakers to complete your sound system.

Order a Custom Autosound 3001DVC Dual Voice Coil 4"x10" Dash Speaker for your 1965-1966 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Speakers & Speaker Grilles  

Installation Instructions

Difficulty

Difficulty: Easy

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Custom Autosound Dash Speaker Dual Voice Coil 4X10 1965-1966 is rated 4.2 out of 5 by 9.
Rated 5 out of 5 by from kicks butt I added an aftermarket Sony, since the previous owner already hacked the dash, to my 66. I added a box in the back with 2 6.5 subs and 2" tweeters and they sounded "so so". I added this dash speaker and WOW. It sounds 10 times better than the box in the back. I keep the fader balanced to get a little of the bass from the back, but I don't really need it. This is a major upgrade and great deal and bolts right up. The picture doesn't show it, but there are two hookups for the dual voice coils. Works awesome and couldn't be happier with it.
Date published: 2015-07-14
Rated 1 out of 5 by from Not A Good Fit I bought this speaker assuming it would be a direct replacement but found out that it was anything but that. I had to make several modifications to the speaker and reluctantly to the speaker grill on the dash. If you are looking for a direct bolt in, this is not it!
Date published: 2015-03-31
Rated 5 out of 5 by from Nice Upgrade I wanted to upgrade the sound in my convertible and this is a fantastic replacement for getting better sound from dash speaker. Easy to install and provides more sound as I cruise with the top down.
Date published: 2015-01-08
Rated 1 out of 5 by from unlistenable Can only play in mono. In the center balance stereo mode, the vocals disappear . CAS said it is a faulty solder and is sending a replacement. Will update after I receive and install the new one
Date published: 2016-04-18
Rated 5 out of 5 by from Wow, what a difference! Recently replaced two small Harrison Custom Audio units with this 4x10 in my '65 Fastback and man, what a difference! Night and day, so much more bass and without all the distortion.
Date published: 2016-02-23
Rated 5 out of 5 by from Worked great for me I bought this for my 1966 Dodge Polara. Worked great with a minor modification. Now I have stereo sound in front as well as in back. Good deal.
Date published: 2016-06-12
Rated 5 out of 5 by from great sound perfect fit I got this speaker to replace my old rat eaten speaker that didnt work anymore. It fit perfect in my 65 mustang coupe. Sounds great.
Date published: 2016-10-29
Rated 5 out of 5 by from Replacement speaker for new system as described--fast shipping--great communication--AAA seller--many thanks
Date published: 2015-12-24
  • y_2016, m_12, d_7, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_SPK34, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 170.83ms
  • REVIEWS, PRODUCT

Product Questions

why is there no photo of the front (other side) of the speaker? Can you add one?

Asked by: annoyedfrustrated
I brought this to the attention of our photography staff, the images will be updated shortly.
Answered by: CJPP Dave
Date published: 2016-03-03

On the Custom Autosound 3001DVC in-dash replacement speaker.... one review says it's a troublesome, non-direct installation. The other 2 reviews indicate it isn't troublesome. What is the CJ part line on this?? I don't want to have to modify anything

Asked by: jack h
You should be fine - it's very possible the troublesome reviewer had a non-OEM Mustang, which might've required the modifications. If you're stock or OEM replacement, you should be fine.
Answered by: CJ Pony Parts
Date published: 2015-06-08

It states that you need a modern radio for the speaker to work. Would the "Custom Autosound USA-2 Radio" that you sell work with this?

Asked by: Jrmjeff
As long as it has left and right speaker outputs, it will work.
Answered by: CJ Pony Parts
Date published: 2015-03-16
  • 2016-12-08T08:13CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_SPK34, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 126.79ms
  • QUESTIONS, PRODUCT

You Might Also Like