Covercraft Block-It 380 Car Cover With Tri-bar Logo and Mirror Pockets for all 1965, 1966, 1967 and 1968 Coupe and Convertible Mustangs.When it’s time to store your classic 1965, 1966, 1967 or 1968 Coupe, Convertible or Fastback Mustang during winter seasons or lengthy periods of inactivity, but you don't have a garage or a suitable area to house her, this Covercraft Block-It 380 Car Cover with a Tri-bar Logo for all 1965, 1966, 1967 and 1968 Coupe, Convertible and Fastback Mustangs is a great investment to make. This cover is able to protect your paint from damage while outside exposed to the elements, or inside, battling dusty, dirty, damp conditions in a garage. This Covercraft Block-It 380 Car Cover can be used for indoor use, but it is designed mainly for outdoor use.
Features and Benefits:
- Custom Made to Fit All 1965-1968 Coupe, Convertible and Fastback Mustangs
- Available With Driver Side or Driver & Passenger Side Mirror Pockets for Added Protection
- High Performance Non-Woven Fabric
- 3-Layer SFS - Designed for Cost-Effective Performance
- A Pair of Pre-Installed Grommets for Locking the Cover in Place
- Inner Layer is Bicomponent Spunbond to Pamper the Vehicle’s Finish
- Elastic Bands at the Front and Rear for Superior Fitment
- A Single Grommet for the Antenna Cutout is Included
- Outdoor or Indoor Use
- Tri-Bar Logo
- Taupe Colored Fabric
- Breathable Fabric
- Dust/Pollution Barrier
- Made in the USA
This outstanding 380 Series fabric offers great performance at a very competitive price. At only 3.2 ounces per square yard, it’s about half the weight of the popular high-performance NOAH fabric. The three-layer construction design uses inner and outer layers of spun-bond, sandwiching a middle layer of protective film barrier. This film barrier has microscopic holes, smaller than droplets of water and most dust and dirt particles, to block penetration of alien materials but still allow any moisture vapor or heat to easily escape from under the cover. The taupe colored fabric is a mild color that is more about function than flair, but still remains an attractive cover. This cover is available to order with just the driver side mirror pocket or both the driver & passenger side mirror pockets included for added protection and versatility.
After working hard on your Mustang, you're going to want to protect it from dust, dirt, the sun and other assailants, whether you garage it or not. While there are lots of options for covering your Mustang, the car covers from Covercraft are some of the highest quality, most durable options on the market. Feel free to take a look around, using CJ Pony Parts website as your vast Mustang database and place your order today!
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$209.99
Covercraft Car Cover WeatherShield HP Black With 50 Years Logo And Mirror Pockets Fastback 1965-1968
Regular Price: $399.99
Special Price: $360.77
CoverCraft offers their Mustang car covers in two different materials. Shown here in gray, on the left, is their Block-It 200 Series. The Block-It 200 is a high potent non-woven fabric that is USA made and designed primarily for indoor use. It is a three-layer polypropylene material for moisture resistance and can be used for limited outdoor, but again, it's designed primarily for indoor use only.
On the right, the tan cover is their Block-It 380 Series. The Block-It 380 is a high performance Kimberly-Clark material that uses two layers with a film in-between. The film is designed to keep out moisture while allowing moisture and heat to escape from underneath the cover.
These covers are designed for both indoor and outdoor use and are UV protected as well. Both the Block-It 200 Series and the Block-It 380 Series have a soft woven liner to protect your paint when installing the cover.
Shown here is a Block-It 380 Series cover on a 1968 Mustang Coupe. This cover will fit all '64 through '68 coupes and convertibles. The fitment is so specific it actually has different models available for both single and dual rearview mirrors.
All CoverCraft covers are going to have the running horse logo on the front, elastic bands for a tighter fit in the front and the rear, a grommet is included for your antenna cutout and two grommets are pre- installed for locking your cover to your vehicle. Your paint job is one of the most expensive parts of your Mustang. Make sure you protect it with a high quality cover from CoverCraft.