Set of Rubber Door Bumpers for 1965-1968 Mustangs.These replacement rubber door bumpers mount on the door jam, eliminating hard contact when closing the door.
Two bumpers mount on each door. One set will do one car.
Product ReviewsWrite a review
Rubber Door Bumper Set 1965-1968 is rated out of 5 by 5.
Rated 5 out of 5 by Ed C from ***Perfect Fit*** These bumpers are great. Very much like the originals. They are VERY difficult to install without damaging paint. Use some grease and be careful.
Date published: 2016-01-20
Rated 5 out of 5 by SalManilla782 from The Best Rubber Door Bumper set I ever bought Same size and shape as the originals, nice and firm. Too early to tell how it will stand the test of time, but seems good. I didn't find the easy installation method until the last one: Use a little lube (I used Simple Green), and hit it 3 times with a plastic mallet. I tried pushing it in with a screwdriver, both from the sides, and down the middle through the slit, and that tore the rubber.
Date published: 2015-08-09
Rated 5 out of 5 by 66emberglo from look just like originals ....but not all hard and brittle---old ones broke in half during removal; installation was a bit challenging due to resiliency of the new rubber, but they look and work good
Date published: 2015-01-09
Rated 5 out of 5 by coconutbay from Just the ticket Fills the slot so the door fits correctly. Not the easiest thing to install, but if you lube it with WD-40 and THEN push in one side with a screwdriver, then you've got it.
Date published: 2015-04-19
Rated 5 out of 5 by cmmisr833 from prrfect look I bought these to fill the empty pls in door. The look great and stopped some of the vibrations while driving.
Date published: 2015-09-04
By Bill Tumas: We're here with a four-piece rubber door bumper kit, fitting all 1964 through 1968 Mustangs. Your '64 through '68 coupe, convertible or fastback takes two of these two rubber bumpers, per side. It mounts to the back end of the door and fits in line with the door when closing. The bumpers install, like is said, right here on the back edge of the door. You want to make sure the pointed section is facing inward so one is going to install right there. The other one installs right down here at the bottom. If your Mustang door is not seated properly, you want to make sure you don't have any missing or damaged rubber door bumpers.