Door Hinge Pin Kit for 1965-1973 Mustangs.This one pin, two bushing kit is perfect for that door hinge that sags and is hard to open or close. It is rare to find original bushings that have not completely worn out.
*To meet original factory specs, this door hinge pin must be cut to length.
Product ReviewsWrite a review
Door Hinge Pin Kit 1965-1973 is rated out of 5 by 1.
Rated 2 out of 5 by FUZZYs garage from not quite the original style I installed these the other day. they are quite a bit longer than the originals and I found the top knurl to be slightly larger than the factory hole in the hinges which had to be reemed to allow for a good tight fit. then cut shorter once in place.
Date published: 2016-02-03
Rated 5 out of 5 by Tim M from worked well I used these hinge pins to rebuild my 68s upper and lower hinges. They worked fine. Good price. They do need to be cut to length but easily done with a 4 inch grinder. Actually replace the pin in a removed hinge is not hard BUT the job in its entirety includes removing the fenders and aligning doors. A full days work and a two man job at times. At least the parts are inexpensive.
Date published: 2015-03-25
Is the bushing OD the as the factory bushing?
You Might Also Like
CJ's Low Price:$27.99
CJ's Low Price:$9.99
By Bill Tumas: We're here with a door hinge pin and bushing for all 1964 through 1973 Mustangs. This generic hinge pin and bushing set will have to be cut to fit to be correct, but will fit all 64 through 1973 Mustangs. If you have excess play in the upper or lower hinge, you can use this pin and the stronger bushings to replace the factory items, which will strengthen the hinge and get rid of the play. These hinge pin and bushing sets are sold individually. Your Mustang uses one set per hinge.