Pair of Black OEM Replacement Door Panel Cups for all 1994, 1995, 1996, 1997 and 1998 Coupe Mustangs with Power Windows.
Various parts of the interiors in Mustangs experience a lot of wear and tear over the years. Door panel cups are no exception. Every time either the driver or passenger opens or closes their door they typically use the door panel cup for this motion. For 1994-1998 Mustang owners, their door panel cups are probably quite worn by now. No longer do you need to be embarrassed by these parts in your interior. CJ Pony Parts offers pairs of black door panel cups for 1994-1998 coupe Mustangs. Don't wait to start enjoying your interior again!
- Includes both driver and passenger side door panel cups
- OEM Stock replacements
- Fits 1994, 1995, 1996, 1997 and 1998 Coupe Mustangs
- Factory black finish
- Includes holes for power windows and door locks
This pair of door panel cups fit all 1994-1998 Coupe Mustangs. These are OEM stock replacement parts so quality and fitment are to be expected. A factory black finish completes this level of quality. No modifications will be necessary for installation, it is as simple as removing your factory door panel cups and installing your new OEM replacements. Additionally, holes are already present for power windows and door locks.
Don't suffer through a tired looking interior any longer. CJ Pony Parts has a solution for worn out door panel cups in your 1994-1998 Mustang. This pair of OEM replacement door panel cups should be the first purchase for your interior.
Order a Pair of OEM Replacement Black Door Panel Cups for your 1994, 1995, 1996, 1997 or 1998 Coupe Mustang with Power Windows from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
Regular Price: $368.99
Special Price: $295.19
Door cups are going to be available for your coupe or convertible in all the factory colors, including the black, tan, saddle, as well as the charcoal we'll be installing on 2001 Bullet. The installation is very simple of these OEM products and we're going to show you how to do it.
Typically the only tool you're going to need to install the door cups is going to be a Phillips-head screwdriver. We're going to start by removing it right here. I do want to make a point of mentioning that if this part of your door panel is damaged, then replacing the door cup's probably not going to fix your issue. You may need a whole new door panel. Typically though, these are okay and the door panel's a problem, simply push down here and pull out. Now there's normally a clip back here. This is another common area these things break. In the case of our Bullet, this is where this one's broken off at.
Going to flip the door cup over, remove the two screws holding our window switches in place. Then pop the clip for the mirrors. The nearest switch is held to the door cup by this little push pin. Simply just push this pad in and slide it through. I'm going to lift it back first and then push it through. Take the window switch. It will just pop right into place on our new door cup. We'll install the switch assembly. Plug in the mirrors. At this point, test everything. Make sure the mirrors are working. Make sure that the door lock works. Don't worry about the windows. If the lock works, if the windows weren't before, they're going to work now as well.
Now what you'll want to do is line this clip up with this opening in the back here and then push the door panel cup into place. That's all there is to it. Repeat the process if you're replacing the passenger side, and you're all finished. Replacing the door cups in your SN95 Mustang not only improvements the function of the door but it also looks a hack of a lot better without the door cup falling off. Installation's very simple, like I said. The only tool required is a Phillips-head screwdriver. Take about five minutes per side and you'll be back on the road in no time.