Pair of Charcoal OEM Replacement Door Panel Cups for all 2001, 2002, 2003 and 2004 Convertible Mustangs with Power Windows.
Are you embarrassed by the interior in your 2001-2004 Mustang, due to wear issues? If so, your door panel cups are most likely one of the items that have experienced wear and tear. Luckily for you and your Mustang, CJ Pony Parts offers OEM replacement door panel cups in charcoal for 2001-2004 convertible Mustangs with power windows. One of the easiest ways to get ahead of the rest of Mustangs is with a fresh interior. Achieve this status today with your purchase of a pair of door panel cups from CJ Pony Parts!
- OEM Stock replacements
- Fits 2001, 2002, 2003 and 2004 Convertible Mustangs
- Includes both driver and passenger side door panel cups
- Factory charcoal finish
- Includes holes for power windows and door locks
This pair of door panel cups fit all 2001-2004 Convertible Mustangs. These are OEM stock replacement parts, so quality and fitment are to be expected. A factory charcoal finish completes this level of quality. No modifications will be necessary for installation, it is as simple as removing your factory door panel cups and installing your new OEM replacements. Additionally, holes are already present for power windows and door locks.
Instead of being like every other Mustang on the road, with original and worn door panel cups, replace yours with these premium quality OEM replacement door panel cups. This purchase is a simple decision, if you want an OEM part with easy installation, order today!
Order this Pair of Charcoal OEM Replacement Door Panel Cups for your 2001, 2002, 2003 or 2004 Convertible Mustang with Power Windows from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$419.99
CJ's Low Price:$75.99
Door cups are going to be available for your coupe or convertible in all the factory colors, including the black, tan, saddle, as well as the charcoal we'll be installing on 2001 Bullet. The installation is very simple of these OEM products and we're going to show you how to do it.
Typically the only tool you're going to need to install the door cups is going to be a Phillips-head screwdriver. We're going to start by removing it right here. I do want to make a point of mentioning that if this part of your door panel is damaged, then replacing the door cup's probably not going to fix your issue. You may need a whole new door panel. Typically though, these are okay and the door panel's a problem, simply push down here and pull out. Now there's normally a clip back here. This is another common area these things break. In the case of our Bullet, this is where this one's broken off at.
Going to flip the door cup over, remove the two screws holding our window switches in place. Then pop the clip for the mirrors. The nearest switch is held to the door cup by this little push pin. Simply just push this pad in and slide it through. I'm going to lift it back first and then push it through. Take the window switch. It will just pop right into place on our new door cup. We'll install the switch assembly. Plug in the mirrors. At this point, test everything. Make sure the mirrors are working. Make sure that the door lock works. Don't worry about the windows. If the lock works, if the windows weren't before, they're going to work now as well.
Now what you'll want to do is line this clip up with this opening in the back here and then push the door panel cup into place. That's all there is to it. Repeat the process if you're replacing the passenger side, and you're all finished. Replacing the door cups in your SN95 Mustang not only improvements the function of the door but it also looks a hack of a lot better without the door cup falling off. Installation's very simple, like I said. The only tool required is a Phillips-head screwdriver. Take about five minutes per side and you'll be back on the road in no time.