Pair of Black Reproduction Door Panel Cups for all 1994, 1995, 1996, 1997 and 1998 Coupe Mustangs with Power Windows.
Many Mustang owners let their interiors go and simply choose not to worry about it. Instead, styling or performance upgrades typically come first. Here at CJ Pony Parts, we believe that a car such as a Mustang deserves to be well-rounded, so we offer many replacement interior parts for these fabulous automobiles. One common area of wear in 1994-1998 Mustang interiors is the door panel cup. Commonly used to open and close the car doors from the inside of the vehicle, door panel cups are usually common areas of wear. CJ Pony Parts offers pairs of replacement door panel cups for these cars that are sure to satisfy you!
- Pair includes driver and passenger side door panel cups
- Fits all 1994, 1995, 1996, 1997 and 1998 Coupe Mustangs
- Includes holes for power windows and door locks
- Installs easily with no modifications
- Factory black finish
This pair of reproduction door panel cups will fit like original door panel cups, and require no modifications for installation. Holes are present on the door panel cups for power windows and door locks. This pair will fit all 1994, 1995, 1996, 1997 and 1998 Coupe Mustangs. Additionally, these door panel cups come in the factory black finish to match the rest of your Mustang interior.
All too often, interiors of Mustangs are left ignored and forgotten. Mustangs are typically modified for performance or style before the interior is touched. Instead of succumbing to this trend, replace your worn out door panel cups and begin enjoying your new interior!
Order a Pair of Black Reproduction Door Panel Cups for your 1994, 1995, 1996, 1997 or 1998 Coupe Mustang with Power Windows from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$368.99
Door cups are going to be available for your coupe or convertible in all the factory colors, including the black, tan, saddle, as well as the charcoal we'll be installing on 2001 Bullet. The installation is very simple of these OEM products and we're going to show you how to do it.
Typically the only tool you're going to need to install the door cups is going to be a Phillips-head screwdriver. We're going to start by removing it right here. I do want to make a point of mentioning that if this part of your door panel is damaged, then replacing the door cup's probably not going to fix your issue. You may need a whole new door panel. Typically though, these are okay and the door panel's a problem, simply push down here and pull out. Now there's normally a clip back here. This is another common area these things break. In the case of our Bullet, this is where this one's broken off at.
Going to flip the door cup over, remove the two screws holding our window switches in place. Then pop the clip for the mirrors. The nearest switch is held to the door cup by this little push pin. Simply just push this pad in and slide it through. I'm going to lift it back first and then push it through. Take the window switch. It will just pop right into place on our new door cup. We'll install the switch assembly. Plug in the mirrors. At this point, test everything. Make sure the mirrors are working. Make sure that the door lock works. Don't worry about the windows. If the lock works, if the windows weren't before, they're going to work now as well.
Now what you'll want to do is line this clip up with this opening in the back here and then push the door panel cup into place. That's all there is to it. Repeat the process if you're replacing the passenger side, and you're all finished. Replacing the door cups in your SN95 Mustang not only improvements the function of the door but it also looks a hack of a lot better without the door cup falling off. Installation's very simple, like I said. The only tool required is a Phillips-head screwdriver. Take about five minutes per side and you'll be back on the road in no time.