Driver Side Black Door Panel Cup for all 1994, 1995, 1996, 1997 and 1998 Coupe Mustangs with Power Windows and Door Locks.
If you own a 1994-1998 Mustang you're obviously probably familiar with the common problems that happen to the door cups on your Mustang. One of the biggest problems is the damage to the rear mounting clip. So if your driver side door cup is damaged it might be a great time to replace yours.
This door cup will work on all 1994-1998 Coupe Mustangs. The door cup features a black textured finish that will match the original door cup. A mounting clip is already installed on the door cup making for an easy installation. A piece of foam is properly placed on the inside of the door cup which helping prevent rattling. The door cup features all the correct holes for the door locks and power windows.
- Fits 1994-1998 Mustangs
- Black Plastic Construction
- Included Mounting Clip
- Anti Rattle Foam
- Correct Hole Cut Outs
Many owners have used their 1994-1998 Mustangs hard. Their interior parts show that, with plenty of wear and tear. Thankfully, CJ Pony Parts has hundreds of parts for SN95 interiors, so this wear and tear can easily be fixed and these Mustangs can look like great in no time. CJ's offers plenty of parts for your Mustang interior, including upholstery, carpet, door panels and more.
Purchase a new Driver Side Black Door Panel Cup for all 1994, 1995, 1996, 1997 and 1998 Coupe Mustangs with Power Windows and Door Locks from CJ Pony Parts today!
Product ReviewsWrite a review
Is this the OEM Ford replacement part?
Does it come in tan?
I need this in the tan color, do you have it? ( left door insert 2000 mustang GT.
You Might Also Like
Regular Price: $59.99
Special Price: $47.99
Regular Price: $368.99
Special Price: $276.74
Regular Price: $99.99
Special Price: $94.99
Door cups are going to be available for your coupe or convertible in all the factory colors, including the black, tan, saddle, as well as the charcoal we'll be installing on 2001 Bullet. The installation is very simple of these OEM products and we're going to show you how to do it.
Typically the only tool you're going to need to install the door cups is going to be a Phillips-head screwdriver. We're going to start by removing it right here. I do want to make a point of mentioning that if this part of your door panel is damaged, then replacing the door cup's probably not going to fix your issue. You may need a whole new door panel. Typically though, these are okay and the door panel's a problem, simply push down here and pull out. Now there's normally a clip back here. This is another common area these things break. In the case of our Bullet, this is where this one's broken off at.
Going to flip the door cup over, remove the two screws holding our window switches in place. Then pop the clip for the mirrors. The nearest switch is held to the door cup by this little push pin. Simply just push this pad in and slide it through. I'm going to lift it back first and then push it through. Take the window switch. It will just pop right into place on our new door cup. We'll install the switch assembly. Plug in the mirrors. At this point, test everything. Make sure the mirrors are working. Make sure that the door lock works. Don't worry about the windows. If the lock works, if the windows weren't before, they're going to work now as well.
Now what you'll want to do is line this clip up with this opening in the back here and then push the door panel cup into place. That's all there is to it. Repeat the process if you're replacing the passenger side, and you're all finished. Replacing the door cups in your SN95 Mustang not only improvements the function of the door but it also looks a hack of a lot better without the door cup falling off. Installation's very simple, like I said. The only tool required is a Phillips-head screwdriver. Take about five minutes per side and you'll be back on the road in no time.