Door Shell Reproduction 1965-1966

CJ's Part Number: DR-V

Regular Price: $258.99

Special Price: $181.29

1419033600 41770
Earn 258 RPM Points What's this?
1391126400 1391126400
On Sale: End of Year Blowout!
DR-V Play Door Shell Reproduction 1965-1966 Video 1

Product Description

Reproduction Door Shell for 1965-1966 Mustangs.

Features the original style textured finish around the door panel. Uses 1965 style door hinge bolts. If you have a 1966 Mustang then you will need to purchase 1965 style door hinge bolts, they are a different diameter then 1966 bolts. If using pony interior door courtesy lights, please view our tech article for cutting instructions.

Click Here for our Door Cutting Template

*Additional shipping listed is charged per door.

Similar Mustang Parts

similar mustang parts More Mustang Doors & Door Skins  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review
Had dents
Very good fit though sheet metal a bit thinner than original. It does have the rough surface sills. Well packed but arrived with dents that needed hours of bodywork to correct. Original replacement not an option as all that were available were as rusted as the door that I needed to replace.
Don J September 21, 2014
good replacements
The bottoms of both of my original doors were all rusted out. I ordered two replacement doors and was expecting the worst. I did have to get different bolts for the hinges than I had for my '66 but that was easily fixed with a trip to the hardware store. I installed all of the internals and was again expecting poor fit up but was surprised that the latch, lock, and regulator all bolted up properly. The simulated wood grain pattern does appear to be different than my original door. Once painted, it is not noticeable to the average person. After installation, the lines match fairly well. I still had tweaking and twisting and some filler work to do to make the lines run clear from font to rear. Overall I am pleased as my only other choice would have been to find a good used set of doors and these are getting hard to find.
Fred July 9, 2014
Door Bolts
The door bolts I purchased didn't fit the new doors at all (way too big). In fact I ended up using the old bolts from my 66 door hinges. ??? I also had to do a lot of 'egging' on the upper door hinge bolt holes to get the top of the door to adjust to the cars body. Wing window bolt access holes will also need to be die ground out to allow for replacement of wing window. Ive always got good products from CJ Pony before but these doors are kinda miss-cut in a few places.
Barry Boeckman June 4, 2013
Hinge fit
I bought both doors 2 years ago as a pair. I installed them yesterdy. Sheet metal is thinner than orignial. The right door fit well but the screw holes in the left door were the wrong size and had to be drilled and retapped to correct size 3/8-16. Lines matched originl. Good thing I bought them on sale or I would be upset.
Dale November 17, 2012
Ok for the money.
Door arrived next day, packaged very well in perfect condition. Purchased a set of replacement hinges as well. Lots of time goes into getting one of these doors to align properly. Minor trimming and welding was needed to get the door/fender reveal exact. The outer curvature of the upper body line is not exact but can be persuaded to align correctly. Planning on ordering the other side soon.
John April 13, 2012
fit good
not sure of buying repro doors, but the fit is good all body lines were good all gaps were like the factory. i would recommend these doors for a driver. metal isn't as heavy as original, but they look good and function better than my rusted out ones. would recommend buying.
shane owens March 8, 2012
6 Results

You Might Also Like

Product Video

By Bill Tumas: We're here with a replacement door shell for your '64 through '66 Mustang Coupe, Convertible, or Fastback. All of our door shells come with this black e-coating to protect against corrosion. Our doors come precut for both your door handle, as well as your door lock.

All of our doors come with all of the holes precut and they're ready to install. Cut the hole in your cutout for your doorpost weather strip, the holes for your door plugs, the adjustable holes for your window guide, all three holes for your door latch, as well as holes for your door bumpers. The inside of the door has the correct texture for '64 through '66, as well as predrilled holes for all of your window and door internals.

All of our doors are predrilled, as well as threaded for your door hinges. The thread patterns are for a '65 Mustang, so if you have a '66 make sure you order the '65 door hinge bolts. Here you can see our replacement door shell installed on this 1965 Mustang Coupe. Notice the gap is very even with the rocker, the same thing with the quarter panel. The overall fitment is going to be very good. The e-coating comes on these doors and we do suggest sanding that off prior to painting.