Driveshaft 28 Spline Slip Yoke for all 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 Mustangs with a T5 Manual Transmission, C4 or a AOD Automatic Transmission.
Are you looking to replace your worn out Drive Shaft Slip Yoke? If so you might be interested in this high quality reproduction. This Driveshaft Slip Yoke is a direct replacement for all 1983-2004 Mustangs with a T5, C4 or an AOD Transmission. The main job of the slip yoke is to rotate the U-joints which is connected to the driveshaft. The Driveshaft then rotates, sending power to the rear end.
This 28 Spline Driveshaft Slip Yoke will get installed on the rear tail section of your transmission. The reproduction Slip Yoke features the correct groves cut out for the original C-clips. Notches are cut out on either side of the Slip Yoke this allows for smooth movement without binding up.
- 1983-1995 5.0L Mustangs with T5 Transmission
- 1983-1995 5.0L Mustangs with AOD Transmission
- 1994-2004 3.8L Mustangs with T5 Transmission
- 1994-1995 3.8L Mustangs with AOD Transmission
- 1979-2004 Mustangs with a C4 Transmission
Please Note: This 28 Spline Driveshaft Slip Yoke can be used on a 1965-1973 Mustang with a T5, AOD or C4 transmission, but a custom u-joint may be required.
Are you having trouble finding the right driveshaft for your Mustang? CJ Pony Parts is your one-stop source for Mustang driveshafts and components that will improve the performance of your Mustang. No matter if your need a driveshaft for a classic or newer Mustang, you’ll find exactly what you need at CJ Pony Parts. We also carry complementary driveshaft parts and accessories such as slip yokes, safety loops, U joints and more.
Purchase a new Driveshaft 28 Spline Slip Yoke for your 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 or 2004 Mustang with a T5 Manual Transmission, C4 or a AOD Automatic Transmission from CJ Pony Parts today!
Product ReviewsWrite a review
I have 87 4cylinder tremic 5 speed trans, will this yoke fit my trans? Thanks I am putting 200 ford inline 6 with this trans in a 40 chev coupe!
do u sell the u-joint for this i have 1966 mustang but 67' conversion trans 28 spline
Does this work with Tremec TKO trans 26 splline and why are there no 26 spline listed? Also, is there a stronger thicker Slip Yoke as my slip yoke snapped causing the Transmission to crack from the bellhousing to the Slip Yoke.
I have a 351w and an AOD that I want to put into in a 1966 mustang. What slip yoke will work with the AOD trans and the u-joint to the stock drive-shaft?
Hi, will this fit a 2000 v6 mustang with the 4r70w? I'm not sure if 4r70w is the same as AOD. Thanks
Hello: is this an OE part?
can I get this with overnight shipping what is my cost my zip code is 53551
I am switching my 3 speed standard to a t5 and need to know some dimensions of the yoke yk6. I need to know the u joint cap size and the over length of the u joint that fits in the yoke (outside lock up), and the series (1310)...
You Might Also Like
CJ's Low Price:$329.95
CJ's Low Price:$64.99