Dual Exhaust Kit With MagnaFlow Mufflers 2" Hi-Po 289 1965-1970

CJ's Part Number: EXK3HM
MSRP: $510.02
CJ's Low Price:
$445.99
1480809600 48676
When you purchase this exhaust kit you might be interested in the items listed below.
CJ's Low Price:
$44.96
Qty
CJ's Low Price:
$14.95
Qty
Earn 445 RPM Points What's this?
Dual Exhaust Kit With MagnaFlow Mufflers 2" Hi-Po 289 1965-1970
Dual Exhaust Kit With MagnaFlow Mufflers 2" Hi-Po 289 1965-1970 Dual Exhaust Kit With MagnaFlow Mufflers 2" Hi-Po 289 1965-1970

Product Description

Dual 2" Exhaust Kit with MagnaFlow Mufflers for all 1965, 1966, 1967, 1968, 1969 and 1970 Mustangs with a 289 Hi-Po Engine.

Enhance the exhaust system of your 1965-1970 Mustang with this brand new Dual Exhaust Kit with MagnaFlow Mufflers. This new kit is now available to the public for purchase from CJ Pony Parts. The 2" exhaust system is a direct replacement for all 289 Hi-Po Engines. So if you’re looking for a performance exhaust purchase this kit today!

This Dual Exhaust Kit with MagnaFlow Mufflers Includes:
- Two (2) MagnaFlow Inlet/Outlet Mufflers
- Passenger/Driver Side Intermediate Pipe
- Passenger/Driver Side Tailpipe
- Eight (8) U-Clamps
- Hi-Po H-Pipe

*This exhaust kit will NOT work with staggered shocks

CJ Pony Parts strives to bring customers the very best equipment kits. This includes producing bundled equipment kits, even when working with equipment that comes from a large name Manufacturer, such as MagnaFlow. With these two impressive MagnaFlow mufflers, CJ's brings you some quality products available in a kit that is not only affordable, but is capable of increasing your Mustangs power and improving its exhaust flow.

Dual Exhaust High Performance Kit with MagnaFlow Mufflers Features and Benefits:
- Muffler Hangers and U-Clamps for Securing the Exhaust System
- MagnaFlow Mufflers Have Offset/Centered Reversible Inlet/Outlets for Custom Installation
- Included Mufflers with Expertly Bent and Welded Piping Increase Exhaust Flow and Performance

The two included MagnaFlow Mufflers have a centered and offset inlet/outlet. Meaning that these MagnaFlow Mufflers are completely reversible, they allow for custom positioning of the mufflers and exhaust pipes during installation. All of the necessary exhaust piping comes with the kit, enough to take you all the way from your Mustangs Hi-Po exhaust manifolds to the very end of the tailpipe, with every piece you will need in between. Also included is an H-Pipe for joining the driver and passenger side intermediate pipes to the driver and passenger side tailpipes, completing your impressive new exhaust system for your 1965-1970 Mustang.

Researching aftermarket exhausts for Mustangs always seems to lead to a few common brands that have quality products and the most recognizable rumbles. Of these, MagnaFlow clearly leads the pack, with over 30 years of experience and some of the highest quality products on the market. CJ Pony Parts offers a wide variety of MagnaFlow products for any Mustang on the road, so check out their products and upgrade your Mustang's exhaust today!

Purchase a new Dual 2" Exhaust Kit with MagnaFlow Mufflers for your 1965, 1966, 1967, 1968, 1969 or 1970 Mustang with a 289 Hi-Po Engine from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Dual Exhaust Kits  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 186.14ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

can i install this on a 6 cylinder does it fit

Asked by: toloza12
It says it fits all 1965-1970 Mustangs, so I'd assume you're good.
Answered by: CJ Pony Parts
Date published: 2015-09-24

Can you tell me the shipping weight and dimensions of this exhaust system? I will be in the US at the end of August and wonder whether I could take it back to UK. Also, can I check that it will fit a '67 convertible, 4 barrel with standard headers? Thx.

Asked by: Richard289
Unfortunately, I don't have dimensions available on that part. It is 57 pounds. It will fit your 1967, as long as you don't have staggered shocks.
Answered by: CJ Pony Parts
Date published: 2015-08-05

Will this system work on a 1968 mustang convertible w/ 289?

Asked by: Dale L
Yes, it will.
Answered by: CJ Pony Parts
Date published: 2015-07-20

Is this kit meant for the gt valance or does it sit under the valance

Asked by: Connor15
The two (2) included MagnaFlow Mufflers have a centered and offset inlet/outlet. Meaning that these MagnaFlow Mufflers are completely reversible, they allow for custom positioning of the mufflers and exhaust pipes during installation, meaning it could be made to fit a GT valance or sit under it, depending upon your preference.
Answered by: CJ Pony Parts
Date published: 2015-05-11

The exhaust is compatible with 1969 Mustang Mach1 big block 390? Thank You Max

Asked by: Maxdb1979
Yes, it should work.
Answered by: CJ Pony Parts
Date published: 2015-02-23
  • 2016-12-04T08:14CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_EXK3HM, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 55.18ms
  • QUESTIONS, PRODUCT

You Might Also Like