Raptor Performance Dual Stage Shift Light with Black Housing and Yellow LED for all Mustangs.With the help of a Raptor Performance shift light, you don't need to worry about missing a shift. You will get consistent results, shifting at the exact desired engine RPM each and every time. The dual stage shift light adds a shift indicator capable of 20,000 RPM. At only 3-1/8" long and 3/4" in diameter, this is the most compact shift light out there. You can mount it virtually anywhere in your vehicle.
Includes an RISC processor for extreme precision and easy user interface. The Raptor Performance Shift Light is self-contained with no RPM activation modules or "pills" needed. A 1000-9900 RPM range is adjustable in 100 RPM increments (RPM range can be doubled to a maximum of 19,800 RPM by doubling the cylinder select switches for your vehicle and setting the RPM to 1/2 of the desired RPM activation point). All you have to do is turn the two rotary RPM switches for the desired setting, select the cylinder setting to match your vehicle and cycle the power. The settings are stored in the shift light's memory and you are ready to go!
The Raptor Performance Dual Stage Shift Light allows the user to set a desired launch RPM, upper and lower launch limits, pulse/rev and shift point setting. Signals to the speedometer or Vehicle Speed Sensor (VSS) are used to determine launch or shift mode. For example, program the launch to 3000 RPM, +/- 200 RPM and a shift point at 6200 RPM. This creates a launch window of 2800 to 3200 RPM. When the vehicle is not moving, the unit enters launch mode automatically. If the RPM is under 2800 RPM, the LEDs will not light. If the RPM is over 3200 RPM the LEDs will flash rapidly. However, when the RPM is between 2800 and 3200 RPM, the LEDs are lit constantly. After the launch, the unit automatically disables the launch mode and enables the shift mode which, in this case, is set at 6200 RPM. This helps you keep your attention off the tach and on the tree so you can focus on your reaction times.
- Seven bright LEDs that are visible even in direct sunlight with four different colors to choose from
- Housing constructed from 6061-T6 aluminum and available in four different anodized colors or chromed aluminum
- Easy wire-up: power, ground and tach signal
- Ten foot long black cable (no need for extra wiring)
- Two different style mounting brackets
- Color matching vinyl covers for reducing emitted light intensity during night racing
*Will not work on cable driven speedometers. However, they can be factory programmed to use a signal from the clutch switch or brake light to determine launch of shift mode.
You Might Also Like
CJ's Low Price:$324.99
CJ's Low Price:$924.99