Dynacorn A-Pillar In Weld-Thru Primer Passenger Side Bronco 1966-1967

Dynacorn: 3719FWT
CJ's Low Price:
$199.00
1480982400 60238
Replace both a-pillars at once with the purchase of the corresponding driver side unit.
Earn 199 RPM Points What's this?
Dynacorn A-Pillar In Weld-Thru Primer Passenger Side Bronco 1966-1967
Dynacorn A-Pillar In Weld-Thru Primer Passenger Side Bronco 1966-1967 Dynacorn A-Pillar In Weld-Thru Primer Passenger Side Bronco 1966-1967 Play Dynacorn A-Pillar In Weld-Thru Primer Passenger Side Bronco 1966-1967 Video 1
Dynacorn

Product Description

Dynacorn Passenger Side A-Pillar in Weld-Thru Primer for all 1966-1967 Broncos.

CJ Pony Parts is excited to offer these all new passenger side a-pillars in weld-thru primer for 1966-1967 Broncos from Dynacorn. Dynacorn is known for offering premium quality items with excellent fitment.

Advantages of Weld-Thru Primer:
- Reduces prep time when welding new parts to new parts that are both covered in the weld thru primer
- Reduced spatter
- Lower distortion of the panels
- Superior conductive properties that help minimize high heat zone problems
- Eliminates corrosion that would form between overlapped panels or multi-layered spot welds
- Helps when welding a new panel to old metal
- Lower resistance at the weld surface allows better penetration into the denser, new steel that helps forgive an old alloy's problems with porosity and impurities
- Helps prevent resin build up between welds that can trap moisture in the old porous steel that leads to failure at the weld borders

These premium quality a-pillars from Dynacorn come in a weld-thru primer finish for your convenience. This is a factory style replacement piece for the passenger side of 1966-1967 Ford Broncos. A-pillars are quite important because the door hinges bolt to these pieces. Additional purposes of these Dynacorn a-pillars are: They are welded directly to the rocker panels, holes have been pre-cut for upper and lower door hinges and slots are present for adjustability.

If you have been searching tirelessly for a company that only sells the finest parts available to restore or modify your beloved 1966-1977 Ford Bronco, you have finally come to the right place. For over 30 years, CJ Pony Parts has been a leader in the automotive industry for carrying the best Mustang parts available and is now also your one stop shop for all things classic Ford Bronco.

Order a Passenger Side Dynacorn A-Pillar in Weld-Thru Primer for your 1966-1967 Bronco from CJ Pony Parts today!

Similar Bronco Parts

similar Bronco parts More A-Pillars & B-Pillars  

Installation Instructions

Mustang Installation

Bronco Applications

This product will fit the following Ford Bronco years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 96.07ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 103.38ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like

Product Video

Dynacorn A-Pillar In Weld-Thru Primer Passenger Side Bronco 1966-1967 Video Transcript
By Bill Tumas: We’re here with Dynacorn's passenger side A pillar fitting your 1966 through 1967 Bronco.

The A pillar has an important job in your classic Bronco, as it supports the weight of the door on the door hinge assembly, so if yours is rotted or damaged, this is an excellent part to replace. This is the complete A pillar, and it comes in a weld through primer, making it ready to install. It includes the threaded inserts for your door hinges.

This is and other high quality Dynacorn restoration parts for your classic Bronco are available right here at cjponyparts.com