Dynacorn B-Pillar In Weld-Thru Primer With Striker Plate Passenger Side Bronco 1966-1967

Dynacorn: 3716WT
CJ's Low Price:
$159.99
1480809600 60233
Replace both b-pillars at once with the purchase of this driver side unit along with your new passenger side b-pillar.
Earn 159 RPM Points What's this?
Dynacorn B-Pillar In Weld-Thru Primer With Striker Plate Passenger Side Bronco 1966-1967
Dynacorn B-Pillar In Weld-Thru Primer With Striker Plate Passenger Side Bronco 1966-1967 Play Dynacorn B-Pillar In Weld-Thru Primer With Striker Plate Passenger Side Bronco 1966-1967 Video 1
Dynacorn

Product Description

Dynacorn Passenger Side B-Pillar in Weld-Thru Primer with a Striker Plate for all 1966-1967 Broncos.

Instead of searching through salvage yards for the Bronco parts you need, simply turn to CJ Pony Parts. We offer the highest quality Bronco parts that are available, such as these Dynacorn B-Pillars. These passenger side b-pillars not only come with a striker plate but they are also finished in weld-thru primer to help finish your restoration project.

Advantages of Weld-Thru Primer:
- Reduces prep time when welding new parts to new parts that are both covered in the weld thru primer
- Reduced spatter
- Lower distortion of the panels
- Superior conductive properties that help minimize high heat zone problems
- Eliminates corrosion that would form between overlapped panels or multi-layered spot welds
- Helps when welding a new panel to old metal
- Lower resistance at the weld surface allows better penetration into the denser, new steel that helps forgive an old alloy's problems with porosity and impurities
- Helps prevent resin build up between welds that can trap moisture in the old porous steel that leads to failure at the weld borders

These b-pillars are factory style replacements for the passenger side of all 1966 and 1967 Ford Broncos. For your convenience, Dynacorn has included a striker plate with this item. This piece has structural integrity in mind. It attaches to the quarter panel and holds the striker pin for the door latch.

If you have been searching tirelessly for a company that only sells the finest parts available to restore or modify your beloved 1966-1977 Ford Bronco, you have finally come to the right place. For over 30 years, CJ Pony Parts has been a leader in the automotive industry for carrying the best Mustang parts available and is now also your one stop shop for all things classic Ford Bronco.

Order a Dynacorn B-Pillar in Weld-Thru Primer with a Striker Plate for the Passenger Side of your 1966-1967 Bronco from CJ Pony Parts today!

Similar Bronco Parts

similar Bronco parts More A-Pillars & B-Pillars  

Installation Instructions

Mustang Installation

Bronco Applications

This product will fit the following Ford Bronco years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 126.62ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 125.69ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like

Product Video

Dynacorn B-Pillar In Weld-Thru Primer With Striker Plate Passenger Side Bronco 1966-1967 Video Transcript
By Bill Tumas: We’re here with Dynacorn's replacement passenger side B-pillar fitting your 1966 through 1967 Bronco.

This reproduction is going to be correct for 66 through 67 only because of the position of the striker assembly. The B-pillar is going to include the strike plate mount, as well as a brand new striker with shims and hardware along with the trim panels as is for every installing.

This and other high quality Dynacorn restoration parts for your classic Bronco are available right here at cjponyparts.com.