Dynacorn Driver Side Door Window Regulator for all 1967 Mustangs.Dynacorn's door window regulator is a direct replacement for your original. The window regulator helps to raise and lower the door window. This is a common part to replace, as it is subject to high wear from constant use.
Similar Mustang PartsMore Mustang Window Components
This product will fit the following Ford Mustang years:
I don't know what the problem was with the previous review. I didn't have any problem installing this regulator. Worked great, the tracks and rollers need to be lubricated before instillation.
When I went to install this regulator, I noticed the metal protruded about 1/16" past the roller for the main brace (the long piece) whereas the original has the metal about 1/16" behind the roller (the roller sticks out). When the metal sticks out past the roller it is nearly impossible to install the regulator since it hangs up on the window channel adjacent to the roller track. I was told to grind it to shape but opted instead to remove the roller channel and feed it through that way. A bit more work but I managed to get it installed OK. So, I'm now putting the door trim and handles on and find out that the window crank screw no longer works with this regulator. The original screw is a #8-32 oval head and the regulator is now a #10-24. Don't use this regulator if you go to shows...unless you have an original #10-24 oval screw for the handles.
You Might Also Like
CJ's Low Price:$68.99
CJ's Low Price:$104.99
CJ's Low Price:$69.99