Dynacorn Driver Side Door Window Regulator for all 1968 Mustangs.Dynacorn's door window regulator is a direct replacement for your original. The window regulator helps to raise and lower the door window. This is a common part to replace, as it is subject to high wear from constant use.
Similar Mustang PartsMore Window Components
This product will fit the following Ford Mustang years:
Product ReviewsWrite a review
Dynacorn Door Window Regulator Driver Side 1968 is rated out of 5 by 1.
Rated 1 out of 5 by RJ_36 from Questionable Quality -corrosion, stripped thread I recently ordered part #M3693D ( 1968 LH DYNACORN DOOR WINDOW REGULATOR). Despite having the Dyancorn name associated with the part I found the quality to be"fair to poor". There was corrosion of the inside of the regulator and one of the rails had a bend in it (see attached pictures) Also, the window crank thread was burred and would not accept a machine screw. I was using the Scott Drake handle and screw ; it would not thread into the hole. I have had to acquire a 8-32 tap to correct the thread. This was a very disappointing purchase and I would suggest you buy the other regulator CJ has available (which is cheaper!)
Date published: 2015-07-11
You Might Also Like
CJ's Low Price:$72.99
CJ's Low Price:$126.99