Dynacorn Full Front Apron Assembly Custom Pair 1965-1966

Dynacorn: 3630QX
CJ's Low Price:
$999.99
1480723200 64172
Based on your selection, you may be interested in the following item.
Earn 999 RPM Points What's this?
Dynacorn Full Front Apron Assembly Custom Pair 1965-1966
Dynacorn Full Front Apron Assembly Custom Pair 1965-1966 Dynacorn Full Front Apron Assembly Custom Pair 1965-1966 Dynacorn Full Front Apron Assembly Custom Pair 1965-1966 Dynacorn Full Front Apron Assembly Custom Pair 1965-1966 Play Dynacorn Full Front Apron Assembly Custom Pair 1965-1966 Video 1
Dynacorn

Product Description

Pair of Dynacorn Custom Front Apron Assemblies for 1965-1966 Mustangs.

When designing your Mustang do you want to step outside the box with modern suspension that eliminates the shock towers? If so you might want to purchase this pair of Custom Full Front Apron Assemblies from Dynacorn. These front apron assemblies eliminate the use of the factory shock towers and in its place high quality flat steel is installed.

The flat replacement steel is designed to mimic the original steel with the correct stamping found on the fender aprons. The main reason why people remove the shock towers is to add wider front wheels and modern suspension which allows for the best performance out of your 1965-1966 Mustang. This pair of full front apron assemblies are manufactured to have all the correct cut outs so you can route the wiring harness and the brake lines in the factory location.

When you install this pair of full front apron assemblies you will gain an extra 7" of engine bay clearance on each side. With the added room in your engine bay you have endless possibilities of engine swaps and power adders. This pair of front aprons allows you to shave the engine bay for a custom look or you can install all the original engine components.

Features:
- Fits 1965-1966 Mustangs
- Eliminates Shock Towers
- Sold in a Pair
- Factory Cut Outs
- Adds 7” of Clearance in Engine Bay

Includes:
- Driver Side Front Frame Rail
- Passenger Side Front Frame Rail
- Front and Rear Fender Aprons
- Shock Tower Delete Panels
- Driver Side Rear Fender Apron Extension
- Passenger Side Rear Fender Apron Extension

Please Note: This Pair of Front Apron Assemblies eliminate the use of the factory suspension and will only work on Mustangs with Mustang II Style Suspension.

Restoring your Mustang can be a massive project. There are literally hundreds of parts that you may need to replace, and finding quality replacements can be a battle. While there are lots of choices out there, Dynacorn offers the widest selection in parts and some of the highest quality found anywhere. CJ Pony Parts offers a wide variety of Dynacorn parts, allowing you to find practically anything you need.

Purchase a new Pair of Dynacorn Custom Front Apron Assemblies for your 1965 or 1966 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Fender Aprons  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 140.44ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

how can i save my vin numbers when using the new fender aprons

Asked by: dgfastback
You can cut the vin out of the old apron and cut out the area in the new apron and weld the vin. into the new apron.
Answered by: rk cjpp
Date published: 2016-10-25
  • 2016-12-03T07:59CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_3630QX, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 109.1ms
  • QUESTIONS, PRODUCT

You Might Also Like

Product Video

Dynacorn Full Front Apron Assembly Custom Pair 1965-1966 Video Transcript
By Bill Tumas: We’re here with a pair of Custom Frame Rail Apron Assemblies fitting your 1965 through 1966 Mustang from Dynacorn. These custom frame rail apron assemblies from Dynacorn are designed for your 1965 through 1966 Mustang when using an aftermarket Mustang II style suspension and a much wider engine. By removing this shock tower area, including these delete plates, gives you an additional seven inches of clearance in your engine bay allowing you to put in a late model modular motor or a big block engine in place. These assemblies are going to include completely new front frame rails that will go from radiator support back to your floors. It has all the necessary pre-drilled holes along with the inserts and it also includes the apron assemblies which connect up to your fenders and have the fender mounting hardware and finally this delete plate that goes in place of where your factory shock towers would go again giving you a lot more clearance in your engine bay. Again, these custom frame and apron assemblies are only designed for use with an aftermarket front suspension. They will not work with a factory style suspension due to the removal of the shock towers. These come in a weld-thru primer and are sold as a pair so they're ready to install.