Pair of Dynacorn Custom Front Apron Assemblies for 1967-1968 Mustangs.
Are you building your 1967-1968 Mustang to turn heads? If so one of the ways you can active that goal is by adding some modern front suspension to your 1967-1968 Mustang. When you add a Mustang II Style Suspension you have the ability to remove the shock towers. So Dynacorn manufactured this pair of Custom Front Apron Assemblies that eliminates the Shock Tower giving your engine bay a clean look.
- Fits 1967-1968 Mustangs
- Eliminates Shock Towers
- Sold in a Pair
- Factory Cut Outs
- Adds Clearance in Engine Bay
Instead of a shock tower Dynacorn installs a piece of sheet metal that has the correct style stamping making the engine bay look somewhat original. When you install this pair of full front apron assemblies you will gain an extra 7" of engine bay clearance on each side. With the added room in your engine bay you have endless possibilities of engine swaps and power adders.
Dynacorns pair of full front apron assemblies are manufactured to have all the correct cut outs so you can route the wiring harness and the brake lines in the factory location. If you’re looking for more of a factory look you can install all the correct engine components in the same location as the factory. When building a Restomod 1967-1968 Mustang you can shave the engine bay for a custom look.
- Driver Side Front Frame Rail
- Passenger Side Front Frame Rail
- Front and Rear Fender Aprons
- Shock Tower Delete Panels
- Driver Side Rear Fender Apron Extension
- Passenger Side Rear Fender Apron Extension
Please Note: This Pair of Front Apron Assemblies will only work on 1967-1968 Mustangs with a Mustang II Style Front Suspension.
Restoring your Mustang can be a massive project. There are literally hundreds of parts that you may need to replace, and finding quality replacements can be a battle. While there are lots of choices out there, Dynacorn offers the widest selection in parts and some of the highest quality found anywhere. CJ Pony Parts offers a wide variety of Dynacorn parts, allowing you to find practically anything you need.
Purchase a new Pair of Dynacorn Custom Front Apron Assemblies for your 1967 or 1968 Mustang from CJ Pony Parts today!
Product ReviewsWrite a review
Does the apron on the right rail have a stock shape for mounting battery? Or die s it require a trunk battery kit
Do they offer just the apron section?? The frame rails are not needed & already installed.
You Might Also Like
Rod & Custom Rack And Pinion/Disc Brake Conversion Kit With Tubular A-Arm System Manual Steering Push Rod V8 1965-1973From:CJ's Low Price:$3,149.99