Pair of Dynacorn Custom Front Apron Assemblies for 1969-1970 Mustangs.
When you convert your Mustangs Classic suspension to a more modern Mustang II Style Suspension you have the ability to remove the shock tower assemblies. So if you purchased your suspension and you find out your frame rails are rusted purchase your pair of custom front apron assemblies from Dynacorn today. When you install this pair of full front apron assemblies you will gain an extra 7" of engine bay clearance on each side.
With the added room in your engine bay you have endless possibilities of engine swaps and power adders. This pair of front aprons allows you to shave the engine bay for a custom look or you can install all the original engine components.
The flat replacement steel is designed to mimic the original steel with the correct stamping found on the fender aprons. The main reason why people remove the shock towers is to add wider front wheels and modern suspension which allows for the best performance out of your 1969-1970 Mustang. This pair of full front apron assemblies are manufactured to have all the correct cut outs so you can route the wiring harness and the brake lines in the factory location.
- Fits 1969-1970 Mustangs
- Eliminates Shock Towers
- Sold in a Pair
- Factory Cut Outs
- Adds 7” of Clearance in Engine Bay
Please Note: This Pair of Front Apron Assemblies eliminate the use of the factory suspension and will only work on Mustangs with Mustang II Style Suspension.
- Driver Side Front Frame Rail
- Passenger Side Front Frame Rail
- Front and Rear Fender Aprons
- Shock Tower Delete Panels
- Driver Side Rear Fender Apron Extension
- Passenger Side Rear Fender Apron Extension
Restoring your Mustang can be a massive project. There are literally hundreds of parts that you may need to replace, and finding quality replacements can be a battle. While there are lots of choices out there, Dynacorn offers the widest selection in parts and some of the highest quality found anywhere. CJ Pony Parts offers a wide variety of Dynacorn parts, allowing you to find practically anything you need.
Order a new Pair of Dynacorn Custom Front Apron Assemblies for 1969-1970 Mustangs from CJ Pony Parts today!
Product ReviewsWrite a review
Very excited about this part. It sounds like it's essentially a 3630T without the shock tower, sway bar bracket and strut mount brace? Is that correct? Thanks! Dan
You Might Also Like
Rod & Custom Rack And Pinion/Disc Brake Conversion Kit With Tubular A-Arm System Manual Steering Push Rod V8 1965-1973From:CJ's Low Price:$3,149.99
CJ's Low Price:$444.44
CJ's Low Price:$444.99