Dynacorn Passenger Side Inner Rocker Panel in Weld-Thru Primer for 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976 and 1977 Broncos.
While restoring a classic 1968-1977 Bronco, chances are the rockers may be rusted out which is quite common. CJ Pony Parts carries a variety of the body parts you need to restore the structural integrity of your Bronco. This all new Passenger Side Inner Rocker Panel in Weld-Thru Primer 3760CWT from Dynacorn is a great way to get started in replacing the rocker panels. The inner rocker panel provides the outer rocker panel with strength and rigidity to support the Bronco's frame.
Advantages of Weld-Thru Primer:
- Eliminates corrosion that would form between overlapped panels or multi-layered spot welds
- Helps prevent resin build up between welds that can trap moisture in the old porous steel that leads to failure at the weld borders
- Helps when welding a new panel to old metal
- Lower distortion of the panels
- Lower resistance at the weld surface allows better penetration into the denser, new steel that helps forgive an old alloy's problems with porosity and impurities
- Reduced spatter
- Reduces prep time when welding new parts to new parts that are both covered in the weld thru primer
- Superior conductive properties that help minimize high heat zone problems
Dynacorn's premium quality inner rocker panels are made from high-grade stamped steel with an innovative weld-thru primer finish for rust protection and are designed using factory specifications for superior fitment. Dynacorn also uses the most up to date tooling in order to create the best and most accurate replacement inner rocker panels on the market.
Restoring your Bronco can be a massive project. There are literally hundreds of parts that you may need to replace, and finding quality replacements can be a battle. While there are lots of choices out there, Dynacorn offers the widest selection in parts and some of the highest quality found anywhere. CJ Pony Parts offers a large variety of Dynacorn parts, allowing you to find practically anything you need.
Order a Dynacorn 3760CWT Passenger Side Inner Rocker Panel in Weld-Thru Primer for your 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976 or 1977 Bronco from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
Regular Price: $39.99
Special Price: $33.99
CJ's Low Price:$649.99
CJ's Low Price:$529.99