Dynacorn Roof Panel with Sail Panels in Weld-Thru Primer Coupe 1965-1966

Dynacorn: 3643XHWT

Regular Price: $529.99

Special Price: $503.49

1490227200 9312
Earn 503 RPM Points What's this?
1490054400 1490918400
On Sale: Up to 30% Off Sale!
Dynacorn Roof Panel with Sail Panels in Weld-Thru Primer Coupe 1965-1966
Dynacorn Roof Panel with Sail Panels in Weld-Thru Primer Coupe 1965-1966 Dynacorn Roof Panel with Sail Panels in Weld-Thru Primer Coupe 1965-1966
Dynacorn

Product Description

Dynacorn Roof Panel with Sail Panels In Weld-Thru Primer for 1965-1966 Coupe Mustangs.

If you have rust damage or dents on your roof, this Dynacorn reproduction is the perfect solution! Although not attached, both sail panels are included.

This quality steel roof panel is to be used as a skin. This means there is no bracing on the underside of the panel, so you will have to re-use the original bracing. Dynacorn's roof panel will provide you with a better fit than any other reproduction out there.

Advantages of Weld-Thru Primer:
Advantages of Weld-Thru Primer:
- Reduces prep time when welding new parts to new parts that are both covered in the weld thru primer
- Reduced spatter
- Lower distortion of the panels
- Superior conductive properties that help minimize high heat zone problems
- Eliminates corrosion that would form between overlapped panels or multi-layered spot welds
- Helps when welding a new panel to old metal
- Lower resistance at the weld surface allows better penetration into the denser, new steel that helps forgive an old alloy's problems with porosity and impurities
- Helps prevent resin build up between welds that can trap moisture in the old porous steel that leads to failure at the weld borders

 

Installation Instructions

Mustang Installation

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 195.97ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

I need the sail panels only. Can you purchase them separately?

Asked by: Rex66
They are not available separately.
Answered by: CJPP Dave
Date published: 2017-03-08

I have holes in my 1967 coupe mustang. Do you sell a roof skin? If not, how can I repair it?

Asked by: Tellytel
A roof panel for the 67 coupe is not available at this time. You could either find a good used roof or patch the existing one.
Answered by: rk cjpp
Date published: 2016-09-12

Will this fit a 1967 coups mustang 

Asked by: Raymoose
No, the 1967 is bigger than the 1965-1966 Mustangs, so it will be too small.
Answered by: CJ Pony Parts
Date published: 2016-03-31

I need a L/H sailpanel for my 68 coupe, will this kit fit it? Thanks

Asked by: stang76
  • y_2017, m_3, d_20, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_CPRP1, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 49.36ms
  • QUESTIONS, PRODUCT

You Might Also Like