Eastwood 13 Ounce Aerosol Can of Brake Gray.Eastwood Brake Gray is a heavy-duty coating containing pure stainless steel pigment in an ultra-durable epoxy ester resin. It's resistant to DOT 3 brake fluid and can withstand temperatures up to 400 degreesF. Brake Gray has excellent corrosion resistance, so it's ideal for use on master cylinders, disc brake calipers, brake drums, spindles, mounting brackets and hardware.
Can also be applied on metal, ceramics, wood and leather. Brake Gray exactly matches Eastwood's Spray Gray.
Similar Mustang PartsMore Paints & Dyes
This product will fit the following Ford Mustang years:
Product ReviewsWrite a review
Eastwood Brake Gray 13Oz. Aerosol Can is rated out of 5 by 20.
Rated 4 out of 5 by 37 Chevy from Brake Gray Shipped quickly and worked great. Contains Stainless Steel filings. Looks great. Some said too silver, stainless will darken with age. They say it "resistant" to brake fluid and it is just that resistant not PROOF. For the money and the look, can't be beat.
Date published: 2015-04-02
Rated 4 out of 5 by old dodge from master cyl paint I had relatively poor coverage rates wish I'd bought more cans it is a bit expensive and the color is more shiny than I expected in grey I would recommend if purchaser reads and understands they need to buy 1 to 2 more cans to get the coverage
Date published: 2014-10-27
Rated 4 out of 5 by Jeff R from Good Paint The paint looks good a little shinny to be considered cast, looks more like stainless steel which I like. I haven't filled the master cylinder yet so I can't vouch for how well it hold up to brake fluid. Little pricey but overall good stuff!
Date published: 2016-05-17
Rated 4 out of 5 by First Bird from Eastwood Brake Gray As others have mentioned, the color is a bit too silver. But, I'm not shooting for concours points, so, it went on easy, covered very quickly, dried quickly and looks nice. I'll use it on more parts under the hood before I am done!
Date published: 2015-05-12
Rated 4 out of 5 by Longarm1 from Good paint, wrong color As others have already said, good paint, durable, impervious to brake fluid, but not really gray in color. More like a subdued silver. Still looks great but doesn't look like cast metal. Maybe it'll darken with age?
Date published: 2016-02-07
Rated 5 out of 5 by 66 Plymouth from Worked great! This paint sprayed well without runs and had good coverage. Paint is more silver than gray, but that was not a problem for my project. It is a nice addition to the aluminum parts on my engine.
Date published: 2016-01-27
Rated 5 out of 5 by 70 AMX from brake gray Cleaned master cylinder with recommended solvent and painted with brake gray. I could see any difference between painted part and bare metal. I would have to say the paint is a perfect match.
Date published: 2016-07-01
Rated 5 out of 5 by Timbo Slice from Looks great under the hood! While I was detailing my engine compartment I figured I needed to coat the brake master cylinder. I think the finished product really helps to make the total job pop!
Date published: 2015-08-14
You Might Also Like