Eastwood Fender Roller

Eastwood: 31158
MSRP: $262.99
CJ's Low Price:
1481155200 12890
Earn 249 RPM Points What's this?
Eastwood Fender Roller

Product Description

Eastwood Fender Roller.

A durable heavy-gauge steel construction with a powder coated finish promises long-term performance. Increase tire and fender clearance, flare fenders and/or repair wheel arch collision damage with this professional grade forming tool. Bolts directly to hub flange. Elongated holes in adapter plate fit all popular 4 and 5 bolt hubs, and are held in place with the included dished washers and vehicles lug nuts.

The Eastwood fender roller will accommodate up to a 120.6 mm (4.75") 4 and 5 lug bolt circles. Forming arm adjusts from 14" to 22-3/4" Delrin ball bearing forming roller is tough enough to form the fender without damaging the paint. To prevent paint from cracking when forming wheel arches gently heat the paint before forming.

At CJ Pony Parts, we specialize in the parts, kits, systems and accessories needed to see your Mustang reach perfection. We serve a thriving community of passionate pony car owners with products made by top brands in the industry, including Eastwood fender rollers and much more.

By offering products made by top brands, we can ensure you get quality and durability with each purchase. You won’t find any inferior products that won’t get the job done. You’ll just find parts of high quality that help you move forward with your ‘Stang.

These products are offered at only the best possible prices. And customers enjoy free, same-day shipping with no minimum purchase required. That means the Eastwood fender roller you’ve been counting on to take the next step in your maintenance, repair or restoration project can arrive at your door in just a matter of days. We know urgency matters when you’re choosing to make an investment in your Mustang, whether it’s a new crate engine or a simple fender roller.

Body work is so important when maintaining a classic Mustang. That’s why CJ Pony Parts offers a huge selection of body components and accessories, an inventory that gives you choice as you look for the parts and tools you need.

If you have any questions about our selection, or if you’re having a hard time finding the product you need, get in touch with one of our customer service representatives. These team members are friendly, helpful and knowledgeable about Mustangs of all generations. Each can provide expert guidance as you consider the Eastwood fender roller and other products.

Don’t let your Mustang fall into disarray. Whether you own a classic first generation or a relatively new Mustang that just needs a little love and care, the Eastwood fender roller is a valuable tool that helps you accomplish so much.

Don’t go to just any source when searching for an Eastwood fender roller or other body components and accessories. CJ Pony Parts is the trusted source for Mustang products that help you make the most of your vehicle. We’ve been serving Mustang owners just like you since 1985, and we would be pleased to help connect you to the Eastwood fender roller and other products you need, all priced affordably and all shipped at a moment’s notice from our warehouse to your front door.

Order your Eastwood fender roller today!

Product Reviews

Write a review
Eastwood Fender Roller is rated 4.1 out of 5 by 35.
Rated 2 out of 5 by from Maybe this one slipped through QC The shipping was fantastic. The tool arrived packaged nicely and the roller looked good at first. That's was the only good part. However while using the tool I discovered the hand wheel part of it was misaligned when they welded it. I managed to roll my fender anyways but I quickly emailed customer service asap. 4 emails and I only got 1 reply back saying he would check if my tool was still under there 1 year warranty and customer service would get back to me. Still have not heard a single thing back!! Very frustrated with customer service.
Date published: 2015-01-02
Rated 2 out of 5 by from not double thickness wheel well fender lips I failed to notice that under the "more info" tag, this unit is not for use with double thickness rear wheel fender lips, nor should it be used on factory rolled wheel-well lips for the purpose of flaring the wheel-well. Customer service informed me that this tool is non-returnable, even though I never used it. If the roller unit of this tool were steel, it would be possible to use the tool for these tasks, with the use of a torch to heat metals....best used during an overhaul because the paint will blister. I am having a CNC'd steel roller made for this purpose. 2 stars....because of the no return policy.....even though I never used the tool, and contacted customer service immediately after receiving tool (read included instructions at that time). Do not fail to read the more info section.
Date published: 2015-12-16
Rated 5 out of 5 by from Awesome! I roll and pull fenders on a daily basis and this was definitely worth the money. I used to use a cheap eBay fender roller that lasted me about 2 months and then broke. I bout the Eastwood fender roller to replace it, and it has been smooth sailing ever since. The glide on the roller is super smooth and the entire system can take a lot of abuse. The only drawback is that the cotter pin in the adjustment screw is kind of weak. I replaced it with a stronger one and haven't had any problems since!
Date published: 2016-05-28
Rated 1 out of 5 by from Poor Quality Tool Shipping was fast. Item seemed fine UNTIL I did my usual 'Tool Prep'. As mentioned in another Review the Adjustment knob bolt and the nut it screws into were 'miss-aligned' or just of very poor quality. The bolt portion of the adjustment knob 'cross-threaded', and I made SEVERAL calls to Customer Service. After being very 'Demanding', I was issued a refund. I finally got a replacement part after the refund, but it was the WRONG replacement part! I know, I should be happy with the refund, but the poor quality of the tool remains, and customer service was very poor overall. NOT a good experience overall!
Date published: 2016-09-25
Rated 2 out of 5 by from Poorly made Mine fell apart out of the box. The weld holding the roller bracket had no penetration and was only being held on by the paint. Rather than ship it back, I just welded the bracket back on myself and the roller works fine. The design is good, they just need to hire some decent welders.
Date published: 2016-05-11
Rated 1 out of 5 by from Not really what I was expecting. Does not work on double wall fenders as advertised. Plastic adjustment handle broke first time using it. I have been rolling fenders by hand, wooden bat and or body hammer (properly) and have had the same results. The tool does work, but it was a waste of $90.00 in my opinion.
Date published: 2015-12-31
Rated 3 out of 5 by from Works good...but required modifications The bung that the black adjustment knob screws into was not centered which made it unusable. In order to use it, I was required to take a grinder and widen the slot that that knob screws into once passing through the bung. Once I did this, it worked just as advertised. Simple quality control could have prevented this.
Date published: 2015-03-03
Rated 5 out of 5 by from Outstanding. Does a fantastic job. OK - I realize that there are warnings all over the tool about not using it on double thickness sheet metal, so be forewarned - but I used it on double thickness sheet metal on the rear wheel wells of a Ferrari and it worked just fine. I used a bit of heat from a heat gun to avoid paint cracking, and worked very gradually (lots of back and forth rolling while moving the adjustment only 1/4 of a turn at a time) - it rolled the double-thickness, spot welded wheel well on both sides with no problem. It looks great (no change to the outside lines of the car, no cracked paint) and bought me some space for a slightly wider wheel and tire package. The tool was easy to use - minimal assembly and easy to mount to the wheel flange (because my Ferrari uses a 46mm bolt rather than a lug nut on a stud, I used some washers on each bolt to provide retention force on the tool without bottoming out the bolt in the hub). I strongly recommend this product - it did better than Eastwood claimed it would.
Date published: 2015-01-10
  • y_2016, m_12, d_2, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_35
  • loc_en_US, sid_EW31158, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 6.74ms

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 93.85ms
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like