Gallon of Eastwood Gel Rust Dissolver.Eastwood's Gel Rust Dissolver harnesses the powerful rust dissolving properties of their popular liquid version and into a clinging gel. This gel adheres to large surfaces and dissolves rust without having to submerse the metal in a tub or bucket. Ideal for roofs, deck lids, hoods, frame rails and so much more!
Eastwood's Gel rust dissolver is easy to use. Simply wire brush off the loose rust and scale apply the Gel with a brush to penetrate deep into the metal, dissolving the rust overnight.
If you are going to top coat the surface, Eastwood recommends using PRE Painting Prep to clean any residue dissolver.
*Always wear eye, skin and respiratory protection. Use in a well ventilated area. Consult MSDS for specific safety precautions. Ensure cap is tight before storing product.
Similar Mustang PartsMore Rust Removers & Inhibitors
Product ReviewsWrite a review
Eastwood Gel Rust Dissolver Gallon is rated out of 5 by 4.
Rated 5 out of 5 by Sevag Rezian from Great product I had a rusted trunk pan so I decided to purchase the gel instead of the liquid because of some areas where I would have to apply it vertically. I coated the pan and covered in plastic and left it overnight. After scraping and rinsing I was surprised to see how well it had worked. I applied a second coat this time I agitated the rusty areas with a wire brush while the gel was still on there, put some more gel after agitating it and let it sit for 3 hours. This gave me the best result, if you want quicker results than the suggested 8 hours try using this method.
Date published: 2015-03-02
Rated 1 out of 5 by Davidgf from Worst product Used as directions stated, as soon as the water touched it the rust came back worse than when we started. Called the tech line and was told NOT to use water as directed, but to use acetone. Had to order a different product and start over.
Date published: 2016-04-29
Rated 4 out of 5 by smog guy from Handy stuff. I have used this product for items large and small, and found it to be very effective. I also wish the gel were thicker. I have found that after a period of time it turns to a liquid, so if you need that feature, use it while it is fresh.
Date published: 2015-09-09
Rated 5 out of 5 by radioed from A GREAT SOLUTION TO RUST PROBLEMS i removed my truck bed on my 2008 super duty .the truck frame needed to be painted , and it had too many places i could not get a grinder with a wire brush into . so i decided to try the gel rust remover . i first used a wire brush and brushed the frame where i could get to it . then i applied the gel with a 2" paint brush . left it sit for more than 8 hrs . then in the morning after i came from the coffee shop i moved the truck outside and hosed the frame off real well . backed the truck into the garage again , turned the heat back on all day and night so it dried real well . the frame was totally derusted , like new .i then applied a coat of primer for rusty metal by rustoleum , left that dry over night , then applied a coat of gloss black rustoleum finish paint . looks like a new frame now . for extremely rusted areas i would recomend more coats of rust remover . i still have to do my drive shaft , and my front axel yet . my drive shaft is really rusted alot . i did apply one coat to it , and it is still rusted . so it will need more work yet . i did pour some rust gel in a can , throw some very rusted bolts from the truck bed fender braces in the can , left them sit in the can over night . the next morning i rinsed them off . they came out in like new condition , ready for paint . so i am well pleased with the gel rust remover .....ed
Date published: 2015-05-06
You Might Also Like