Eastwood Metal Blackening System

Eastwood: 15357Z
CJ's Low Price:
$49.99
1481414400 58965
You should consider picking up some primer to go along with this Eastwood product.
CJ's Low Price:
$25.99
Qty
Earn 49 RPM Points What's this?
Eastwood Metal Blackening System
Eastwood Metal Blackening System Eastwood Metal Blackening System Eastwood Metal Blackening System Eastwood Metal Blackening System Eastwood Metal Blackening System
Eastwood

Product Description

Eastwood Metal Blackening System

Any vehicle that is subjected to the elements will experience wear. One of the most common areas of fading and deterioration are factory pieces that were finished in black oxide or phosphate. If this has happened to parts on your vehicle, don't worry. CJ Pony Parts offers an Eastwood Metal Blackening System that will replicate this factory finish that you are missing. Additionally, this system will aid in rust prevention.

Product Features:
- Replicates OEM black oxide/phosphate finish
- Chip and chemical resistant
- Resists temperatures up to 500° F
- Protects against rust and corrosion
- Not affected by DOT 3 brake fluid or gasoline
- No special equipment, no heat cure
- For iron, steel, stainless, and aluminum

Many factory brackets and fasteners originally were given a black oxide/phosphate finish to protect them. Eastwood¹s Metal Blackening System allows you to apply a factory looking finish, with no special equipment and no need to heat cure. This 2 component product protects against rust and temperatures up to 500° F. It not only replicates the look of black oxide, but the feel as well, while being even more durable.

Eastwood Metal Blackening can be applied by multiple methods including: brushing, airbrush, detail gun or included Preval sprayer.

Brush On:
1. Follow all surface prep and product mixing instruction steps outlined previously.
2. Be sure to wear protective gloves, eye protection and respiratory apparatus as described in safety instructions.
3. A good quality disposable foam brush works best for smooth, even product application.
4. Carefully dip foam brush into mixed Eastwood Metal Blackening, then spread onto surface using smooth, uninterrupted strokes.
5. This product is designed to go on in several thin coats which are much more effective than a single thicker application. To apply additional coats, wait a minimum of 5 minutes between coats. 2 coats are recommended.

Airbrush or Detail Gun Application (Preferred Method):
1. Follow all surface prep and product mixing instruction steps outlined previously.
2. Be sure to wear protective gloves, eye protection and respiratory apparatus as described in safety instructions.
3. Use a gravity-feed detail gun or airbrush with a 0.3 to 0.5 mm needle/nozzle set and mist on the first coat of Eastwood Metal Blackening.
4. This product is designed to go on in several thin coats which are much more effective than a single thicker application. To apply additional coats, wait a minimum of 5 minutes between coats. 2 coats are recommended.
5. Do not allow the product to cure in the spray gun or permanent damage will occur. The gun must be cleaned thoroughly with Surface Prep cleaner, acetone or lacquer thinner.

Order an Eastwood Metal Blackening System from CJ Pony Parts today!

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 96ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 145.85ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like