Eastwood 120VAC or 240VAC/250A Output MIG Welder.
This all-new 120VAC or 240VAC/250A Output MIG Welder from Eastwood is the ultimate choice for achieving professional results at a fraction of the cost compared to other similar welders on the market! Whether you are restoring your Mustang as a hobby on the weekends or building race cars as a career, the 250A MIG welder from Eastwood is easy to use and powerful enough for any project.
Eastwood 250A MIG Welder Features and Benefits:
- Welds Steel up to a 1/2" Thick
- Welds Aluminum up to a 1/4" Thick
- Operates on 120 or 240 Volts
- Infinite Adjustable Welding Range from 35 to 250 Amps
- Has a 60 Percent Duty Cycle at the 250 Amp Setting
- Weighs Only 66lbs
- Torch Cable and Ground Cable are 10' Long
- State of the Art Inverter Technology
- Uses 4" or 8" Wire Spool
- Optional Spool Gun for Aluminum Wire
- Perfect for the Track or on the Job Site
- Able to Plug In to a Generator
The guys over at Eastwood designed this MIG welder using state of the art technology for superior power levels when it comes to welding steel up to a 1/2" thick or aluminum up to a 1/4" thick. The great thing about Eastwood's 250A MIG welder is that it can run off of 120 or 240 volts with the efficiency of the inverter. You could easily take this to the race track or on the job site and plug it into a generator.
With a 60 percent duty cycle at 250 amps, Eastwood's MIG welder is going to keep you welding longer and help you get the job done faster. A 60 percent duty cycle means it can weld for 60 percent of the time at 250 amps. To get an idea of how long that is, simply move your hand like you are welding for 6 straight minutes before breaking for 4 minutes.
Eastwood's MIG welder also has infinite adjustability of both its voltage and wire feed speed settings. It can take both 4" and 8" diameter spools and feed steel, stainless or flux core wire from .023" to .045". You could even add the optional spool gun and start welding aluminum like a pro.
- MIG Gun
- Ground Cable and Clamp
- Gas Regulator and Hose
- Instruction Manual
- 120VAC to 240VAC Adapter Cord
- 2lb Spool of .030" MIG Wire
- 8" Wire Spool Adapter
- Two Extra Contact .030" Tips
Please Note: The unit comes from Eastwood setup for MIG welding with a regulator and hose. The user must provide a bottle of shielding gas from a local welding supply shop. Always follow Eastwood's instructions for proper safety requirements when performing welding tasks.
As you work on restoring or upgrading your Mustang, you might need quite a few specialized tools and products to do the job right. It's easy to get all of these tools and products in one place, as CJ Pony Parts offers dozens of great products from one of the leaders in aftermarket automotive restoration tools and equipment, Eastwood.
Order the Eastwood 120VAC or 240VAC/250A Output MIG Welder from CJ Pony Parts today!
Similar Mustang PartsMore Sheet Metal Tools
This product will fit the following Mustang years:
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$230.99