Eastwood Multi-Unit Welding Cart Black For MIG/TIG/Plasma

Eastwood: 11616
CJ's Low Price:
$104.99
1481155200 46284
Earn 104 RPM Points What's this?
Eastwood Multi-Unit Welding Cart Black For MIG/TIG/Plasma
Eastwood Multi-Unit Welding Cart Black For MIG/TIG/Plasma Eastwood Multi-Unit Welding Cart Black For MIG/TIG/Plasma
Eastwood

Product Description

Eastwood Black Multi-Unit Welding Cart for a MIG Welder, TIG Welder, and/or Plasma Cutter.

Make your welding process simpler with this Black Multi-Unit Welding Cart from Eastwood. Currently available at CJ Pony Parts, this cart will make the storage, accessibility, and maneuverability of your welders & welding equipment easier than ever before.

Features:
- Top Shelf Holds MIG or TIG Welder
- Bottom Shelf Holds Plasma Cutter
- Middle Shelf Stores Necessary Welding Accessories
- Gas Bottle Mount Can Store up to 6 Different Tubes of Filler Rods
- Holds up to 80CF Gas Bottle
- Cut Out in Rear to Allow Plasma Cutter Cable Routing
- Design of Top Shelf Allows Side Door Access on MIG Welder
- Two Side Hooks for Cable Storage
- Heavy Duty Front Castor Wheels
- Molded Heavy Duty Rear Wheels
- Front Mounted Handle for Easy Maneuverability
- Satin Black Powder Coated Finish

This multi-unit welding cart has a satin black powder coated finish, and features three separate shelves that will make your welding projects easier. The top shelf holds a MIG or TIG Welder, while the bottom shelf stores your Versa Cut Plasma Cutter, so you’ll have both tools right with each other for convenience. The overall composition of the top shelf will give you accessibility to the side door of the MIG Welder when on the cart. Store the rest of your components with ease by putting the rest of your necessary welding accessories on the middle shelf, and the various welding cables around the two hooks on the side.

There is a provision in the back that allows the routing of your Plasma Cutter’s cable to go through the rear of the bottom shelf. This cart also features a gas bottle mount that can hold up to an 80CF gas bottle, and can also hold a TIG Rod Holder that can store up to six different tubes of filler rods.

This Eastwood black multi-unit welding cart doesn't just help with storage, but allows for smooth maneuverability with a front mounted handle. With heavy duty castor wheels on the front, and molded heavy duty wheels on the back, you should have no issue moving this cart around your garage or work area.

Welding Cart Dimensions:
- Total Height - 30.5"
- Total Width - 16"
- Total Length Including Handle - 38"
- Total Length Not Including Handle - 32"
- Top Shelf Width - 11.75"
- Top Shelf Length - 20"
- Middle Shelf Width - 11.75"
- Middle Shelf Length - 15"
- Bottom Shelf Width - 11.75"
- Bottom Shelf Length - 17.5" 

*Using a gas bottle larger than the intended 80CF is not recommended.

Order an Eastwood Black Multi-Unit Welding Cart for a MIG Welder, TIG Welder, and/or Plasma Cutter from CJ Pony Parts today!

Product Reviews

Write a review
Eastwood Multi-Unit Welding Cart Black For MIG/TIG/Plasma is rated 4.6 out of 5 by 5042.
Rated 4 out of 5 by from Almost perfect. I originally purchased this cart in 2013 to carry my TIG200. Assembly is fast and everything goes together as it should. I added a small ratchet strap because the TIG200 is tall. Fast forward to 2016...I received my MIG250 and put it on the cart. The front lip was too tall and the MIG250 didn't sit right. It wouldn't be a major modification and they were on sale so ordered another. To my surprise, they've changed the design to accommodate the MIG250 and it fits perfectly. My only real issue is the limited bottle capacity. I do a lot of MIG and an 80cuft. bottle is gonna mean more refills.
Date published: 2016-06-26
Rated 2 out of 5 by from Overloaded when used as directed When used as directed this cart will be toting around well over 100 pounds so it needs to be strong. Unfortunately, cheap hardware and flimsy metal in key areas really let it down. It flexes quiet a bit laterally at the front which could have been aided by additional reinforcement around the lower end of the front vertical supports. The large rear wheels have actual bearings (good) but they are not even remotely close fitting to the axle that slides through them (bad) resulting in more wobbliness. I'm disappointed that improvements that really don't cost a lot (if anything) were not made to this cart before it came to market. An additional issue is that my tig filler metal tubes do not fit in the holes in the back area designed for them.
Date published: 2014-12-31
Rated 5 out of 5 by from Welding Cart The Eastwood Multi-Unit Welding Cart is of high quality with good casters and wheels. When bolted together it is solid and with out wobbling, well able to hold the weight of two welders and a tank. Only two grips. 1. It has lots of sharp edges. 2. There is nothing to hold the top welder in place. In my case a Hobart Handler 190. I would like to have some strap or clamp or some thing to hold it in place. I'll have to find a way my self.
Date published: 2014-10-30
Rated 4 out of 5 by from Nice cart Easy to assemble, good quality, and sturdy. This is a nice design for a welding cart designed to hold two machines. My welder tends to slide around on the top more than I'd like. I'm going to put a small lip on both sides to make sure my welder doesn't get pulled off inadvertently. One other change I'd like to see is replace the shelf with a drawer. I realize this would increase the price a little but, personally I think that addition would make this a five star cart.
Date published: 2015-05-16
Rated 5 out of 5 by from Great products, unreliable pricing I have purchased both the tig and mig welders with carts - included in a package and separately - have been exceptionally well treated by customer services (beyond belief) and very happy with the quality relative pricing - sometimes - except that I feel like I've been screwed when the price quickly drops (i.e. look at tig/plasma cutter combo prices in past. I know it is marketing but still makes me reluctant to buy here.
Date published: 2014-12-11
Rated 5 out of 5 by from Easy to build and sturdy too I bought this to hold my mig and plasma cutter,like a few others has said you need more holders for the leads, but overall a good unit. Instructions are clear as a bell went together and everything fit like a glove. Still new to me so I will come back after a while and update. I don't weld every day or week and the people who say the bigger tank wont fit are using it a lot more often and should have then bought a commercial cart and then if they do so much welding then they could adapt the cart to fit a larger tank.
Date published: 2014-12-08
Rated 4 out of 5 by from Decent cart for the price Overall this cart is pretty decent. It's fairly large compared to some of the others I looked at which I liked. Has enough room to fit welder, plasma cutter, and accesories. Medium or large gas bottle does not fit well however without slight modification to u shaped bracket that bottle rests against at the top. Cart could stand to be a little bit more sturdy but I don't plan to tow it behind my truck down the street so it shouldn't be an issue. Overall it will serve its purpose well to use in my garage.
Date published: 2015-05-13
Rated 5 out of 5 by from Nice cart More than large enough to hold my tig welder and Plasma cutter. A great way to package everything up
Date published: 2015-12-31
  • y_2016, m_11, d_24, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5042
  • loc_en_US, sid_EW11616, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 172.59ms
  • REVIEWS, PRODUCT

Product Questions

What ga. is the sheet metal?  Will it accept a 125 cu.ft. gas bottle?  What materials are the tires and wheels comprised of?  What is the dia. of the axle?

Asked by: sheepboy
You can't use larger than a 80 cf gas bottle. It includes Heavy Duty Front Castor Wheels and Molded Heavy Duty Rear Wheels.
Answered by: CJ Pony Parts
Date published: 2015-07-27
  • 2016-12-01T08:22CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_EW11616, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 260.79ms
  • QUESTIONS, PRODUCT

You Might Also Like