Eastwood Original HotCoat Powder Coating Gun

Eastwood: 10198
CJ's Low Price:
$104.99
In StockOrders placed today will ship tomorrow1398211200
Earn 104 RPM Points What's this?
PCHCG
PCHCG Play Eastwood Original HotCoat Powder Coating Gun Video 1

Product Description

Eastwood Original HotCoat Powder Coating Gun.

Stop spray painting your Mustang parts. Use Eastwood's inexpensive, Original HotCoat Powder Coating Gun and get professional powder coating results in your own garage!

Powder coating is far superior to any other finish available. It's more resistant to chipping, scratches, fading and wear than other finish. The color options are virtually unlimited, with high and low gloss, metallic, and clear finishes available. With the UV resistant qualities of many of the powders, colors stay bright and vibrant longer. Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections.

One 8 ounce bottle of powder covers the same area as 2-3 cans of spray paint. Clean-up is easy, since you can just simply sweep-up the over-sprayed powder.

Powder Coating Benefits:
- Extremely Durable Finish
- Coat and Cure in Under 1 Hour
- Easy to Apply
- Quick Color Changes
- Economical
- Contains No Environmentally Harmful Solvents

Includes:
- Original HotCoat Powder Coating Gun with Power Source
- Powder Color Chip Chart
- Instructions

*HotCoat Powder Coating System requires a 5-10 psi compressed air source and a dedicated electric oven (or toaster oven) set at 400F for 20 minutes.

Tech Tip: Fill the bottle no more than 1/4 to 1/3 full and wave the nozzle in a circular motion about 4-6" from the surface for best results.

Please Note: Use a disposable dust mask when handling or applying powder coating. The powder, like common flour, can be explosive when suspended in the air in high concentrations. To minimize any explosion risk, sweep-up immediately after use, do not vacuum the powder from the floor. Cure the powder coated part in a well-ventilated area. The urethane powder coating Eastwood sells produces a very small amount of Isocyanates when the powder flows out of the gun. This usually occurs about 3-5 minutes after the part is placed in the oven to bake. Wear a respirator with fresh cartridges when curing or inspecting flow-out progress. Do not apply powder into a small boxed area.

Similar Mustang Parts

similar mustang parts More Mustang Paints & Dyes  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review