Eastwood Rust Encapsulator White 15 Ounce Aerosol Can

Eastwood: 14824Z
MSRP: $22.99
CJ's Low Price:
$21.99
1480809600 52596
Earn 21 RPM Points What's this?
Eastwood Rust Encapsulator White 15 Ounce Aerosol Can
Eastwood Rust Encapsulator White 15 Ounce Aerosol Can Eastwood Rust Encapsulator White 15 Ounce Aerosol Can
Eastwood

Product Description

Eastwood 15 Ounce Aerosol Can of White Rust Encapsulator.

Is nature beginning to take its course with your Mustang? This all-new rubberized Rust Encapsulator from Eastwood is the perfect way to stop rust and corrosion from spreading, preventing a problem from going bad to worse.

Features and Benefits:
- Twice The Corrosion Resistance of Eastwood's Original Formula
- Epoxy-Fortified for Better Adhesion and Topcoat Compatibility
- Penetrates Deeper to Prevent Rust from Spreading or Forming
- Tested to 500 Hours in a Salt-Spray Chamber
- Cures Faster than Other Brands
- 15 Ounce Aerosol Spray Can Covers About 10 Square Feet
- As Seen on "My Classic Car" TV Show
- Low-VOC Formula is Acceptable in California
- Available in Either White or Gray

Tested against all the top competitors, Eastwood's Rust Encapsulator has proven to top the list when it comes to sunlight resistance, preventing rust creep and overall durability. In comparison to most off-the-shelf under coatings, this rubberized Rust Encapsulator from Eastwood is applied directly over the rust, stopping it dead in its tracks. Whereas other competitors’ brands leave air bubbles under their coating for rust to continually spread.

Eastwood has engineered this Rust Encapsulator with high-tech flex agents, meaning it has multiple benefits. Its pliable finish protects your Mustang's surfaces from abrasions, road hazards and deadens sound from the outside. Due to over 500 hours of salt-spray chamber testing, Eastwood can confidently stand behind their newly-redesigned Rust Encapsulator. All you have to do is simply apply directly over rust or bare metal; there is no need for a top coat.

Easy Step-By-Step Instructions:
1. Use a wire brush to remove loose rust, scale and paint. Remove all dust, grease and oil deposits from the problem area.
2. Lightly sand the surrounding paint with 220-grit sandpaper.
3. Shake the can of Eastwood's Rust Encapsulator for at least 2 minutes after the mixing ball in the can begins to rattle.
4. Apply Rust Encapsulator 10-12 inches from surface. Single coats are dry to the touch in 20 minutes, and are thoroughly dry in 3-4 hours at 68F.
5. For increased durability, a second coat can be applied one hour after the first coat. (If needed)
6. Allow 6-8 hours after the last coat before applying a top coat.

If you're battling the works of nature on your Mustang, don't hesitate to order Eastwood’s 15 Ounce Aerosol Can of Rust Encapsulator for your Mustang from CJ Pony Parts today!

 

Installation Instructions

Mustang Installation

Product Reviews

Write a review
Eastwood Rust Encapsulator White 15 Ounce Aerosol Can is rated 4.5 out of 5 by 11.
Rated 5 out of 5 by from Good lasting coverage ! This is a good encapsulator when applied correctly. As with all Eastwood Rust Encapsulator products some common sense prep is required. You just don't spray it on and walk away. For years I only used their black and then resprayed a color to finish. This white is good as it's applied. No need to spray over it unless you want a different color. I sprayed the underside of a truck hood. It is holding up well against road rash and heat. Highly recommend it.
Date published: 2015-01-16
Rated 2 out of 5 by from Not impressed. I bought this product last fall and painted my door bottoms with it. Rusty areas were wire brushed and then wiped down clean with lacquer thinner and allowed to dry. The paint applied well but was thin and required dozens of coats to get a good coverage and thickness, paint was allowed to dry between coats. Once done the paint was a reasonable color match to my GM's Arctic White and I was happy with the results. Unfortunately the product does not stand up to NH winter and road treatment chemicals and by spring the rust has completely overrun the paint and is probably where it would be if I had done nothing. At this point I don't see this product being a winner in the war on rust.
Date published: 2016-05-06
Rated 5 out of 5 by from Great product I've used the black a lot and love it. The only thing I would say is different with the white is that where I could use the black as the final finish after two coats, the white is just too translucent to act as a final coat the way the black is. Plan to put paint over the top of the white encapsulator to get a truly white finish. This is exactly what you want over rust on a part which will have a light colored finish, just top it off with the paint color of your choice.
Date published: 2015-11-09
Rated 5 out of 5 by from great this is the 4th can and i put it on my outdoorrailing which i formerly couldnot get rustfree for more then 4month ,now the railing is through a very harsh winter here in nj and it is still as good as when i first applied it . it`s worth the price because one does not have to repaint i hope for the next couple of years. GO AND BUY THAT STUFF!!!
Date published: 2015-04-27
Rated 5 out of 5 by from I like this stuff. Have used the black version in the past, out of a can. I was very happy with the results especially since it was outside with no topcoat. However, shelf life was not infinite. Hated to waste this pricy stuff. So, I bought a spray can of the white.. Hopefully this will solve the shelf life issue. I used it on a white trailer. Went on great,sanded well for topcoat. Saved a lot of coats of primer and white paint to be able to paint white over it!
Date published: 2016-01-06
Rated 5 out of 5 by from Excellant Coverage I purchased about 3 weeks ago and finally got to use some. I need it on me house. It is steel sidings that thru the years of other owners neglect has rusted in places creating eye sore. I used a wire wheel brush electric to knock off the heavy rust and sprayed the white over it. My son and I liked the coverage and the ease of use. Wondered How the Quart or Gallon would cover Using A Spray Gun ..... Worth the Try for the price. I No not whether it will hold up. I intend to purchase additional for other items in white and the black. The temperature was a lil chilly today But the prep was easy and the coating we sprayed two coats. Will Update review thru the winter and spring. We will be painting a Gray over this white in the spring. Great stuff. It encapsulated the rust and none came thru as yet ....... Amazing Coverage .... Will also purchase for the truck, Car, and tractors. As well as the other things needing painted. Thank You For A Great Product.
Date published: 2015-11-01
Rated 2 out of 5 by from NOT IMPRESSED I found multiple coats were required, 4-5 actually to get decent converge. Then I discovered this does not play well with Urethane topcoat. My paint wrinkled and did not adhere well at all. Was forced to strip the project and start over. I never had a problem like this when using POR15 products.
Date published: 2015-10-13
Rated 5 out of 5 by from About the best you can buy at any price. After wasting money on Rustoleum, I bought this on other's recommendations and WOW. It did exactly what was advertised. I have never seen another rust product like it. I bought more and more. Finally a solution to rust.
Date published: 2015-06-20
  • y_2016, m_12, d_2, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_PTREW, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 108.39ms
  • REVIEWS, PRODUCT

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 182.66ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like