Eastwood Versa Bend Sheet Metal Brake.The Eastwood Versa Bend 20" Offset Sheet Metal Brake is a precision engineered metal working tool designed to produce both standard variable length bends as well as accurate 1/2" offset bends up to 90 in 20 gauge sheet steel and 18 gauge aluminum in widths up to 20". Also capable of creating bends in 18 gauge steel in widths less than 12".
Create floor reinforcement channels and ribs, sections of corrugated pickup bed floors; truck bedside panels, inner fender structures and much more all with one convenient vise or bench mount tool!
-Offset Metal Brake Assembly (1)
-Actuating Rods (2)
-Vice Mount Tab and Hardware (1)
-Bench Mount Brackets and Hardware (2)
Similar Mustang PartsMore Tools & Supplies
This product will fit the following Ford Mustang years:
Product ReviewsWrite a review
Eastwood Versa Bend Sheet Metal Brake is rated out of 5 by 5299.
Rated 5 out of 5 by Tom L from Solid tool, works well I've now used the tool several times on a project. It's proven to be well built and reliable.
Date published: 2015-07-30
Rated 4 out of 5 by starfish from AS expected A low tech unit but performs as expected for the money, sufficient for most home shop work.
Date published: 2015-10-18
Rated 4 out of 5 by mrb575hp from It is what i need for the money. I wish you had included some instruction on how to move the black adjustment handles before bent one on my first try with the machine . I finally figured out that you push down on the screw head and pull up. This moves the black handle out of the way to make a complete bend. Of course i bent one of the black adjustment handles on my first bend. Now i have one bent black adjustment handle and one good one I watched all your you tube video, I never saw anyone show how to make adjustment to the black handles when you install the sheet metal for bending. To me it one of the most important part of the breaking metal on the Versa-Bend. I have never worked with metal. I did not except a high dollar machine for 150.00 It works good for the money.
Date published: 2016-08-25
Rated 4 out of 5 by KevinH from A pretty good tool for average auto sheet metal wo It forms good repeatable bends, and is quick and easy to set. The 20" size is just about right for my needs and the build quality is sufficient to eliminate flexing.
Date published: 2016-05-12
Rated 5 out of 5 by Sharpe351 from Great function, easy use. Working well for small bending work. Functions flawlessly for its size.
Date published: 2015-06-18
Rated 5 out of 5 by Chris Hayes from Great for the money Purchased this to replace a cheaper one from a discount store which was horrid quality. Typical Eastwood, this is a little more money but much more value. The tool worked very well for what it is. Don't expect to bend thick steel, its just not heavy enough for that. But for its intended purpose its a very solid buy.
Date published: 2016-04-27
Rated 4 out of 5 by Coastie from Good product for the cost I looked around on the Internet for a inexpensive brake to do some small sheet metal work. Some of the cheap models used c clamps to hold the work down. But for another $40-50 the Eastwood has built in clamps. So for lite sheet metal work it's a good price. Another feature is that it can be portable using a vice.
Date published: 2016-02-12
what gauge stainless steel will it comfortably bend ?
Our product description outlines all of the pertinent details on what this product is capable of.
Date published: 2015-10-26
How do i contact you for an order? Phone number and address.
Call 1-800-888-6473, or simply order online via our website.
Date published: 2015-04-09