Eastwood Vibratory Tumbler Kit 5 Pound With Bowl And Media

Eastwood: 20043
CJ's Low Price:
1481068800 48707
Earn 99 RPM Points What's this?
Eastwood Vibratory Tumbler Kit 5 Pound With Bowl And Media
Eastwood Vibratory Tumbler Kit 5 Pound With Bowl And Media Eastwood Vibratory Tumbler Kit 5 Pound With Bowl And Media Eastwood Vibratory Tumbler Kit 5 Pound With Bowl And Media Eastwood Vibratory Tumbler Kit 5 Pound With Bowl And Media Eastwood Vibratory Tumbler Kit 5 Pound With Bowl And Media

Product Description

Eastwood 5 Pound Vibratory Tumbler Kit with a Bowl and Media.

Make your hardware shine like new with this Eastwood 5 Pound Vibratory Tumbler Kit with a Bowl and Media now available at CJ Pony Parts. This kit will not only remove the rust or coating from your hardware, but will also give it a brilliantly polished luster, to make it look like it just came out of the box.

Kit Includes:
- Tumbler Assembly with 110VAC Motor
- 5 Pound Capacity Bowl
- 2 Pounds of Green Rust Cutting Media
- 2 Pounds of Dry Shine Polishing Media

This Vibratory Tumbler Kit includes an 110VAC, high torque motor that creates a consistent vibratory motion that can handle even the toughest rust or coating removal. All you'll need to do is drop whatever hardware you'd like to clean into the 5 pound capacity tumbler, add green media, and plug it in. After cleaning, the dry shine can then be used to further buff the hardware for a custom polished finish.

- Polishes Surface of Bolts, Nuts, and Other Hardware
- Handles Tough Rust and Coating Removal
- Suitable For Parts Up To 7 Inches Long
- Easy to Use
- Cleaning Time: 6-24 Hours

This easy-to-use tumbler kit will thoroughly clean & polish your small pieces & hardware without the risk of getting them ejected by a wire wheel. With a cleaning time of 6-24 hours, the vibratory action of this tumbler works more quickly than a rotating tumbler. This tumbler kit from Eastwood is suitable for parts up to 7 inches in length, and can handle & remove even the toughest rust and coatings. This tumbler is designed with rugged high-speed bearings to ensure long term durability, making this kit the perfect choice for your hardware cleaning needs.

You may already be aware that CJ Pony Parts has a wide variety of parts that you can use to complete nearly any project on your Mustang. However if you need some additional tools & supplies to finish those projects, check out the Tools & Supplies section of CJ Pony Parts what you can find everything you’ll need to complete the task.

Order your Eastwood 5 Pound Vibratory Tumbler Kit with a Bowl and Media from CJ Pony Parts today!

Product Reviews

Write a review
Eastwood Vibratory Tumbler Kit 5 Pound With Bowl And Media is rated 3.6 out of 5 by 10.
Rated 4 out of 5 by from Good Product Good Product. Removes rust well. Its not perfect, i purchased this product to be used as part of a multistep process to electroplate parts. Bath in degreaser, then evaporust, then green media, then corncob media, then electroplate. This system works well. This will not remove leftover locktight from bolt threads, it will not magically turn your old parts to brand new parts but it does a really good job. If you want perfection you will need to break out the wire wheel before polishing. It does save time when you have many small parts that need polishing.
Date published: 2014-11-11
Rated 1 out of 5 by from Does Almost Nothing The catalog leads you to believe that this will remove rust, paint, corrosion, coatings, etc. The first thing the instructions says is that paint must be removed ahead of time. If I have to wire-brush the paint off, why did I buy the tumbler? I put a few small items in the bowl with the green media and ran it for about 8 hours. The parts don't look a bit different, but it must be doing "something" because the green pyramids now have a brown coating of rust dust. Maybe if I added Eastwood's Rust Dissolver it would work better, but, if I have to soak the parts in rust dissolver, WHY did I buy the tumbler? I also bought a package of the "Brown Plastic Medium-Cut Pyramids". Maybe they'll work better, but I'm so dis-heartened that I don't care whether I try them or not. I guess I'll just go back to using carb cleaner and the bench-grinder wire brush to remove paint and rust, and use the tumbler for rifle cartridge casings.
Date published: 2016-03-13
Rated 4 out of 5 by from Replacement one works great.... The first one died right away, seemed like the bearings/motor seized as it would only hum when turned on. They sent a replacement without any hassle and the replacement one is still working fine. This will be the first Eastwood branded product that has failed and the customer service was perfect as expected.
Date published: 2015-05-22
Rated 4 out of 5 by from not a bad unit A good value with or without the media. Decent action though a little noisy. Lock nut that holds the bowl in place should be replaced with a wing nut for easier bowl removal. Turning entire unit upside down to empty is just asking for . The ny-lock nut is slow to remove
Date published: 2015-04-17
Rated 5 out of 5 by from worked great Got this to use on some rusty nuts and bolts. I used the rust dissolver on them first then placed them in the tumbler. Let it run for a couple of hours while I was outside doing other chores. Came back in to clean bolts.
Date published: 2015-03-09
Rated 4 out of 5 by from Good value Does just what I bought it to do. I had a bunch of grimy bolts from a motor tear down and bought the tumbler to help me clean them up. With the additive, it cleans parts up as well as could be expected. I recommend!
Date published: 2015-05-19
Rated 4 out of 5 by from Cleans up parts well The tumbler cleans up loose parts well. The first one I got quit working after about being used 3-4 times for a total run time less than 12 hours. Eastwood sent me a replacement, no questions asked. I have had no problems with the replacement tumbler.
Date published: 2015-05-08
Rated 3 out of 5 by from Not Too High Quality The first time I used this tumbler, the lid popped off, causing the lid, and media to fly out, along with the items inside. I had to really torque down the top lid screw, and had to add a small dab of blue lock tight to prevent the lid from vibrating off. After 7 hours of vibrating, my rusty bolts did not appear to be too clean , in comparison to the advertised photos.
Date published: 2016-06-10
  • y_2016, m_12, d_2, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_EW20043, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 11.63ms

Product Questions

I ordered an Eastwood Vibratory Tumbler this morning. Can you give an estimate of when it might ship?

Asked by: mollyman
5-7 days.
Answered by: CJ Pony Parts
Date published: 2015-01-27
  • 2016-12-01T08:22CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_EW20043, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 171.78ms

You Might Also Like